35813655

1

Chapter

Thank you for your buying Foxconn’s 650/651M02 series motherboard. This series of motherboard is one of our newest products,
and offers superior performance, reliability and quality, at a
reasonable price. This motherboard adopts the advanced SiS
650GX/ 6 51+962L/962 chipsets, providing users a computer
platform with a high integration-compatibility-performance price
ratio.This chapter includes the following information:
Main Features
Motherboard Layout

Chapter 1

Product Introduction

Main Features
Size
mATX form factor of 9.6” x 8.5”
Microprocessor
Supports Intel® Pentium®4 Socket 478 (Willamette/Northwood) processors
Supports Intel® Celeron® S ocket 478 (Willamette/Northwood) processors
Supports FSB at 400MHz/533MHz (FSB 533MHz Supported on 651M02only)
Supports up to 2.8GHz Socket 478 Northwood processor
Chipset
650M02: SiS650GX (North Bridge) + 962L/962 (South Bridge)
651M02: SiS651 (North Bridge) + 962L/962 (South Bridge)
System Memory
Provides two 184-pin DDR DIMM Sockets
Supports for PC 1600/PC 2100/PC 2700 (PC 2700 supported on 651M02 only)
Supports for 64Mb/128Mb/256Mb/512Mb technology up to 2GB
USB 2.0 Ports
Supports hotplug
Six USB 2.0 ports (four rear panel ports, one onboard USB headers providing two extra ports)
Supports wake-up from S3 (optional), S1
Supports USB 2.0 Protocol, 480 Mbps transmission rate
Onboard 1394 (optional)
Support hot plug
With rate of transmission at 400Mbps
Self-configured addressing
Can connect with 2 independent 1394 units synchronously at most, such
as HDD, CD-ROM
OnboardLAN
Supports 10/100Mbit/sec Ethernet
10/100M LAN interface built-in on board

2

650M02 and 651M02 Series User Manual

Chapter 1

Product Introduction

Onboard IDE
Supports up to four independent drives
Supports Ultra DMA 133/100/66
Two IDE interfaces can connect with four IDE units, including hard disk and
CD-ROM/DVD-ROM etc.
Onboard I/O
One FDD interface; supports two 3.5” or5.25” FDDs with 360K/720K/1.2M/
1.44M/2.88M format
One high-speed 16550 COM interface with 16-byte FIFO buffer
One infrared interface (optional)
Four USB ports (with 6 ports supported at most)
one 1394 port (with 2 ports supported at most) (optional)
One parallel port supporting SPP/EPP/ECP mode
All I/O ports can be enabled/disabled in the BIOS setup
Onboard Audio
AC’ 97 2.2 SpecificationCompliant
Supports S/PDIF output (optional)
Onboard Line-in jack, Microphone jack, Line-out jack
Supports 5.1 channels audio (optional)
Onboard Graphics
Supports integrated VGA display functions
Supports external AGP 2.0 specification; supports 4X display cards
BIOS
Licensed advanced AWARD (Phoenix) BIOS, supports flash ROM, plugand play ready
Supports IDE, CD-ROM, SCSI HDD and USBdevice boot up
Green Function
Supports ACPI (Advanced Configuration and Power Interface)
Supports five system modes—S0 (normal), S1 (power on suspend), S3
(suspend to RAM)(optional), S4 (Suspend to disk – depends on OS), and
S5 (soft-off)

650M02 and 651M02 Series User Manual

3

Chapter 1

Product Introduction

Expansion Slots
Three PCI slots
One AGP slot
One CNR slot (optional)Advanced Features
PCI 2.2 Specification Compliant
Supports Windows 98/2000/ME/XP soft-off
Supports Wake-on-LAN

4

650M02 and 651M02 Series User Manual

Chapter 1

Product Introduction

Motherboard Layout

16
1

15
14

2
3

13

4
5

12

6
7

11

10

9

8

Note:
The above motherboard layout is provided for reference only;
please refer to the physicalmotherboard.

650M02 and 651M02 Series User Manual

5

Chapter 1

Product Introduction

1 1394 PHY (optional)
The RTL8801B is IEEE 1394a 100/200/400 Mbps 2-Port Cable Transceiver/
Arbiter (PHY) Chip. Provides two fully compliant cable ports at 100/200/400
Mbps.
2 ATX 12V connector
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
3 AGP slot
This...