Covers the following models: TR-5a-19,TR-5a-20, TR-5a-21, TR-5a-24, TR-5a-N, TR-5Plus-24, TR-5Plus-N, TR-500, TR-5amp-24, TR-5amp-N, TR-SL5-16, TR-SL5-N
Tranzeo TR-5A Series
Revision: 2.2 Firmware: 5.0.5 Date: 2010.07.27
Version 1.0 Version 1.1 Version 1.2 Version 1.3 Version 1.4 Version 2.0 Version 2.1 Version 2.2 May 15, 2006 May 30,2006 September 8, 2006 January 9, 2008 January 28, 2008 November 10, 2009 February 12, 2010 July 27, 2010
Tranzeo Wireless Technologies Inc.
19473 Fraser Way Pitt Meadows, BC Canada V3Y 2V4 Toll Free Number: 1.866.872.6936 Technical Support: 1.888.460.6366 Local Number: 1.604.460.6002 Fax Number: 1.604.460.6005
iiiiii This document is intended for Public Distribution Pitt Meadows, B.C. CanadaV3Y 2V4
General Inquiries: email@example.com Sales: firstname.lastname@example.org Technical Support: email@example.com
19473 Fraser Way,
Tranzeo Wireless Technologies
This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to providereasonable protection against harmful interference when the device is operated in a residential environment. This device generates, uses, and can radiate radio frequency energy. If not installed and used in accordance with the user guide, may cause harmful interference to radio communication. In case of harmful interference, the users will be required to correct the interference at their ownexpense. The users should not modify or change this device without written approval from Tranzeo Wireless. Modification will void warranty and authority to use the device. For safety reasons, people should not work in a situation where RF exposure limits could be exceeded. To prevent this situation, the users should consider the following rules: Install the antenna so that there is a minimum of 100 cm(39.37 in) of distance between the antenna and people. The TR-5amp series requires 268 cm (105.5 in) between the antenna and people. Do not turn on power to the device while installing the antenna. Do not connect the antenna while the device is in operation. Do not collocate or operate the antenna used with the device in conjunction with any other antenna or transmitter. This device has beendesigned to operate with the antennas listed below, and having a maximum gain of 32 dB. Antenna types not included in this list or antennas of a type listed having a gain greater than the value listed are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. TR-GD58-26 – 5.8 GHz 26 dBi Grid antenna TR-HTQ-5.8-12 – 5.8 GHz 12 dBi Omni antenna TR-58V-60-17 – 5.8 GHz 17dBi Vertical Sector antenna TR-58H-90-16 – 5.8 GHz 16 dBi Horizontal Sector antenna TR-5.8-32db-ant—5.8 GHz 32dBi Dish antenna In order to ensure compliance with local regulations, the installer MUST enter the antenna gain at the time of installation. See Chapter 3: Wireless Settings, for details.
Industry Canada Compliance
Operation of this device is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Pitt Meadows, B.C. Canada V3Y 2V4
iiiiiiiii This document is intended for Public Distribution 19473 Fraser Way,
Tranzeo Wireless Technologies
You mustread and understand the following safety instructions before installing the device: This antenna‘s grounding system must be installed according to Articles 810-15, 810 -20, 810-21 of the National Electric Code, ANSI/NFPA No. 70-1993. If you have any questions or doubts about your antenna‘s grounding system, contact a local licensed electrician. Never attach the grounding wire while the device is...