Configuración Básica De Ma5300 Ip-Dslam

Configuración Básica de MA5300 IP-DSLAM

User Access Verification

Username: root
Password:

MA5300>enable
{ |level-value }: significa enter

MA5300#configure terminal

MA5300(config)#line 0 (es para ubicarse en el menu de configuración de consola)
{ |lastindex }:

MA5300(config-line0)#no exec-timeout ( desabilitar logout automatico)MA5300(config)#terminal
{ language|type|user }:language (cambiar a lenguaje)

The other language has not been loaded, so fail to switch it

Configurar Perfil ADSL

MA5300(config)#adsl
{ line-profile|alarm-profile|activate|deactivate|alarm-config|pvc }:line-profile
{ add|delete|modify|rename|atuc|atur }:add
{ |INTEGER }:3 ( ID perfil)

Start profile 3 adding.During input,press 'CTRL+C' to quit,then settings at this time are neglected.
> Will you set basic configuration for modem? (y/n)[n]:y
> ADSL operating mode:
> 0: All(G992.1, G992.2, T1.413)
> 1: Full rate(G992.1 or T1.413)
> 2: G992.2(g.lite)
> 3: T1.413
> 4: G992.1(g.dmt)
> 5: g.hs(G992.1 and G992.2£¬G992.1 is prior)
> Please select (0~5) [0]:
> Trellis coding 1-enable2-disable (1~2) [1]:
> Upstream channel bit swap 1-enable 2-disable (1~2) [2]:
> Downstream channel bit swap 1-enable 2-disable (1~2) [2]:
> Will you set channel mode? (y/n)[n]:y
> Please select channel mode 0-interleaved 1-fast (0~1) [1]:
> Will you set noise margin for modem? (y/n)[n]:y
> Minimum noise margin in downstream (0~15 dB) [0]:
> Maximal noise margin in downstream (0~31 dB)[31]:
> Target noise margin in downstream(0~15 dB) [12]:
> Minimum noise margin in upstream (0~15 dB) [0]:
> Maximal noise margin in upstream (0~31 dB) [31]:
> Target noise margin in upstream (0~15 dB) [12]:
> Will you set parameters for rate? (y/n)[n]:y
> If you want the fixed rate, set the Minimum value equal to Maximum value.
> Minimum bit rate in downstream (32~8160 Kbps) [32]:
>Maximum bit rate in downstream (32~8160 Kbps) [6144]: 512
> Minimum bit rate in upstream (32~896 Kbps) [32]:
> Maximum bit rate in upstream (32~896 Kbps) [640]: 256
Add profile 3 successfully

Verificar Perfiles

MA5300(config)#show adsl
{ line-profile|alarm-profile|chipset|line|port }:line-profile
{ all|INTEGER }:3

o


MA5300(config)#show adsl line-profile 3

Followingare all items of the ADSL Line-Profile 3 :
Line-Profile name : LINE-PROFILE-3
atuc rate mode : ADSL_RATEMODE_ADAPTATSTARTUP
atuc rate channel ratio(%) : 100
atuc target SNR Margin(dB) : 12
atuc max SNR Margin(dB) : 31
atuc min SNR Margin(dB) : 0atuc downshift SNR Margin(dB) : 0
atuc upshift SNR Margin(dB) : 0
atuc min upshift time(s) : 0
atuc min downshift time(s) : 0
atuc channel fast min tx-rate(Kbps) : 32
atuc channel fast max tx-rate(Kbps) : 512
atuc down bit swap mode : disable
atuc up bit swap mode: disable
atuc trellions mode : enable
atuc transmission mode : all
atuc channel mode : FAST
atur rate mode : ADSL_RATEMODE_ADAPTATSTARTUP
atur rate channel ratio(%) : 100
atur target SNR Margin(dB) : 12
aturchannel fast max tx-rate(Kbps) : 256


MA5300(config)#board-adsl (commando para entrar dentro la tarjeta adsl)
{ INTEGER }:0 (escoja un slot)

Desactivar Ports ADSL:

MA5300(config-board-adsl0)#deactivate
{ all|INTEGER }:all
MA5300(config-board-adsl0)#deactivate all


Activar Ports ADSL:

MA5300(config-board-adsl0)#activate
{ all|INTEGER }:all
{ |INTEGER }:3...