Floor pod manual

Solo disponible en BuenasTareas
  • Páginas : 46 (11371 palabras )
  • Descarga(s) : 0
  • Publicado : 5 de diciembre de 2011
Leer documento completo
Vista previa del texto
®

Pilot’s Guide
Manuel de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto

An in-depth exploration of the technologies and pulsing tonal pleasures of Floor POD Plus.

Electrophonic Limited Edition available @ www.line6.com/manuals 40-00-0116 Rev B

The serial number can be found on the bottom of your Floor POD Plus. It’s the number that begins with “(21)”. Please note ithere for future reference:

SERIAL NO: WARNING: To reduce the risk of fire or
electric shock, do not expose this appliance to rain or moisture.

CAUTION: To reduce the risk of fire or electric shock,

do not remove screws. No user-serviceable parts inside. Refer servicing to qualified service personnel.

CAUTION: This equipment has been tested and found to comply with the limits for a ClassB digital device

pursuant to Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The lightning symbol within a triangle means “electrical caution!” It indicates the presence of information aboutoperating voltage and potential risks of electrical shock.

The exclamation point within a triangle means “caution!” Please read the information next to all caution signs.

You should read these Important Safety Instructions Keep these instructions in a safe place
Before using your Floor POD Plus, carefully read the applicable items of these operating instructions and safety suggestions: 1. Obey allwarnings on the Floor POD Plus and in this Basic Features Guide. 2. Do not place near heat sources, such as radiators, heat registers, or appliances which produce heat. 3. Guard against objects or liquids entering the enclosure. 4. Connect only to AC power outlets rated 100-120V or 230V 47-63Hz (depending on the voltage range of the included power supply). 5. Do not step on power cords. Do notplace items on top of power cords so that they are pinched or leaned on. Pay particular attention to the cord at the plug end and the point where it connects to the unit. 6. Unplug your Floor POD Plus when not in use for extended periods of time. 7. Do not perform service operations beyond those described in this Basic Features Guide. In the following circumstances, repairs should be performed onlyby qualified service personnel: • liquid is spilled into the unit • an object falls into the unit • the unit does not operate normally or changes in performance in a significant way • the unit is dropped or the enclosure is damaged

8. Prolonged listening at high volume levels may cause irreparable hearing loss and/or damage. Always be sure to practice “safe listening.” Floor PODPlus Pilot’s Guide © 2009, Line 6, Inc.

Please Note: Line 6 and POD are trademarks of Line 6, Inc. All product names, trademarks, and artist names are the property of their respective owners, which are in no way associated or affiliated with Line 6. Product names, images, and artist names are used solely to identify the products whose tones and sounds were studied during Line 6’s sound modeldevelopment. The use of these products, trademarks, images and names does not imply any cooperation or endorsement.

Controls & Connections

Controls & ConneCtions
1•1

1 Amp Models – This knob selects one of 32 Amp Models originally from the famous Line 6 POD 2.0. There are two Models for each category silk-screened around the knob, for example, Black Panel has two Models, one indicatedby a Red light and one by a Green light. Refer to Chapter 2 for a detailed listing of each Model. When you choose an Amp Model, a Cabinet Model is also loaded automatically. For example, when you choose the Brit Hi Gain Model (based on* the Marshall® JCM 800), a Cabinet Model based on* a Marshall® 4x12 will be loaded too. You can mix ’n’ match different cabs by pressing in the Amp Models knob,...
tracking img