Froce10

Rapid EqualLogic Configuration Series

Dell Force10 S25N or 50N
Implementation Guide

SISfeedback@Dell.com June 2012

Revisions
Date April 2012 June 2012 Description initial release Minoredits

THIS WHITE PAPER IS FOR INFORMATIONAL PURPOSES ONLY, AND MAY CONTAIN TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANYKIND. © 2012 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information,contact Dell. Dell, the DELL logo, and the DELL badge, PowerConnect™, EqualLogic™, PowerEdge™ and PowerVault™ are trademarks of Dell Inc. Broadcom® is a registered trademark of Broadcom Corporation.Intel® is a registered trademark of Intel Corporation in the U.S. and other countries. Microsoft®, Windows®, Windows Server®, and Active Directory® are either trademarks or registered trademarks ofMicrosoft Corporation in the United States and/or other countries.

1 Establish console access
To perform this configuration you will need the following: • • A DB9 to RJ45 serial cable (an adapter isprovided with the Force10 switch). A management station (server, desktop, or laptop) running Windows (XP, 7, 2003, 2008) in close proximity to the switch (i.e. the serial cable must connect from thissystem to the switch). You may also use a Windows host server for this. • A terminal emulator such as HyperTerminal, Putty, or TeraTerm. HyperTerminal is only available in Windows XP and 2003. Putty andTeraTerm can be found for download through a quick internet search.

2 Hardware setup
1. Stack two Dell Force10 switches using the appropriate stacking cables and turn the power on. 2. Connect aserial cable to the serial port of the switch that shows A0 or B0 on the LED display. Note: Make sure that the serial connection is made to the No. 1 (or management) unit in order to access the...