Páginas: 40 (9892 palabras) Publicado: 7 de diciembre de 2010
Programming Manual
International Edition, Rev.2.2 Beta Release

Revision History
Rev. No. Rev.2.0 Beta Rev.2.1 Beta Released Date Aug. 01, 2008 Aug. 21, 2008 First Release Page 29 Vibrator – Default value is changed from Disable to Enable. Page 31 Auto Power Off Duration – Default value is changed from Extremely long to Short Page 30 Rename “Pulse Driven Duty” to “Flash DutyCycle” Page 31 Besides Alternative mode, the Auto Power Off Duration is also applicable to Presentation Mode and Flash Model. Page 31 Besides Force Mode, Presentation Mode, Flash Mode is also referred to as “hands free” mode. Hands Free Time-out setting is applicable to hands free mode. Page 31 The Good Read Duration is applicable for Vibration and Beep, not for LED. Page 17 Code128/EAN-128Setting (Parameter Selection – revise to Disable/Enable function code conversion from Disable/Enable check digit transmission) Description

Rev.2.2 Beta

Sep. 26, 2008

Programming Manual


© Copyright Cino Group © Copyright PC Worth Int’l Co., Ltd PC Worth makes no warranty of any kind with regard to this publication, including, but not limited to, the implied warranty ofmerchantability and fitness for any particular purpose. PC Worth shall not be liable for errors contained herein or for incidental consequential damages in connection with the furnishing, performance, or use of this publication. This publication contains proprietary information that is protected by copyright. All rights are reserved. No part of this publication may be photocopied, reproduced or translatedinto any language, in any forms, in an electronic retrieval system or otherwise, without prior written permission of PC Worth.

PC Worth warrants its products against defects in workmanship and materials from the date of shipment, provided that the product is operated under normal and proper conditions. The warranty provisions and durations are furnished by different warranty programs.The above warranty does not apply to any product which has been (i) misused; (ii) damaged by accident or negligence; (iii) modified or altered by the purchaser or other party; (iv) repaired or tampered by unauthorized representatives; (v) operated or stored beyond the specified operational and environmental parameters; (vi) applied software, accessories or parts are not supplied by PC Worth;(vii) damaged by circumstances out of PC Worth’s control, such as, but not limited to, lightning or fluctuation in electrical power. Any defective product must follow the warranty program and RMA procedures to return PC Worth for inspection.

Programming Manual

FCC part 15B EN55022, EN55024, EN61000-3-2, EN61000-3-3 CNS13438 Industry Canada ICES-003 LED Eye Safety IEC60825-1FuzzyScan

Table of Contents
Getting Started
Getting Familiar with your FuzzyScan Connecting/Disconnecting Cable Connecting Host Interface 1 1 2

Configure Your FuzzyScan
Bar Code Programming Manual Programming Procedures Host Interface Selection Symbology Reading Control Keyboard Interface Control 3 4 8 9 20 24 27 28 32

Programming Manual

Serial Interface Control Wand Emulation ControlOperation Control Condensed DataWizard

Keyboard Function Code Table ASCII Input Shortcut Host Interface Quick Set / Operation Mode Quick Set Option Codes System Commands 39 40 41 42 43


Getting Started

Getting Familiar with your FuzzyScan
Thank you for choosing Cino FuzzyScan Imager. All FuzzyScan Imagers deliver world-class performance for a broad range of marketapplications to unleash your productivity. This document provides installation and programming instructions for FuzzyScan Imagers.

Connecting/Disconnecting Cable
FuzzyScan imagers provide PS/2(DOS/V) Keyboard Wedge, RS-232 Serial, USB interfaces capability. To disconnect the cable, please straighten one end of a paper clip, then insert it into the cable release hole and press in. After that,...
Leer documento completo

Regístrate para leer el documento completo.

Conviértase en miembro formal de Buenas Tareas