Hahagag

Solo disponible en BuenasTareas
  • Páginas : 5 (1058 palabras )
  • Descarga(s) : 0
  • Publicado : 7 de febrero de 2012
Leer documento completo
Vista previa del texto
UA741
GENERAL PURPOSE SINGLE OPERATIONAL AMPLIFIER
s LARGE INPUT VOLTAGE RANGE s NO LATCH-UP s HIGH GAIN s SHORT-CIRCUIT PROTECTION s NO FREQUENCY COMPENSATION s REQUIRED s SAME PIN CONFIGURATION AS THE UA709
N DIP8 (Plastic Package)

DESCRIPTION The UA741 is a high performance monolithic operational amplifier constructed on a single silicon chip. It is intented for a wide range of analogapplications.
D SO8 (Plastic Micropackage)

s Summing amplifier s Voltage follower s Integrator s Active filter s Function generator
The high gain and wide range of operating voltages provide superior performances in integrator, summing amplifier and general feedback applications. The internal compensation network (6dB/ octave) insures stability in closed loop circuits. PIN CONNECTIONS (topview)
Part Number Temperature Range N UA741C 0°C, +70°C UA741I -40°C, +105°C UA741M -55°C, +125°C Example : UA741CN • • • D • • •

ORDER CODE
Package

N = Dual in Line Package (DIP) D = Small Outline Package (SO) - also available in Tape & Reel (DT)

1 2 3 4

8 7 6 5

1 - Offset null 1 2 - Inverting input 3 - Non-inverting input 4 - VCC5 - Offset null 2 6 - Output 7 - VCC+ 8 - N.C.November 2001

1/5

UA741

SCHEMATIC DIAGRAM
Non-Inverting input Vcc+

Q8

Q9

Q12

Q13

Inverting input Q1 Q2 C1 30pF

R7 4.5kΩ Q15

Q14

Q18

Q3

Q4

R5 39kΩ

R8 7.5kΩ

R9 25Ω Output R10 50Ω

Q16 Q7 Q17 Q20

Q5

Q6

Q10 Offset null 1

Q11 Q22

R3 50kΩ R1 1kΩ R2 1kΩ R4 5kΩ
R12 50kΩ R11 50Ω VccOffset null 2

ABSOLUTE MAXIMUM RATINGS
Symbol VCC Vid ViPtot Toper Tstg
1.

Parameter Supply voltage Differential Input Voltage Input Voltage Power Dissipation Output Short-circuit Duration Operating Free-air Temperature Range Storage Temperature Range
1)

UA741M

UA741I ±22 ±30 ±15 500 Infinite

UA741C

Unit V V V mW

-55 to +125

-40 to +105 -65 to +150

0 to +70

°C °C

Power dissipation must be considered to ensure maximumjunction temperature (Tj) is not exceeded.

2/5

UA741
ELECTRICAL CHARACTERISTICS VCC = ±15V, Tamb = +25°C (unless otherwise specified)
Symbol Vio Parameter Input Offset Voltage (Rs ≤ 10kΩ) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Input Offset Current Tamb = +25°C T min ≤ Tamb ≤ Tmax Input Bias Current Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Large Signal Voltage Gain (Vo = ±10V, R L = 2kΩ) Tamb = +25°C Tmin ≤Tamb ≤ Tmax Supply Voltage Rejection Ratio (Rs ≤ 10kΩ) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Supply Current, no load Tamb = +25°C T min ≤ Tamb ≤ Tmax Input Common Mode Voltage Range Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Common Mode Rejection Ratio (RS ≤ 10kΩ) Tamb = +25°C Tmin ≤ Tamb ≤ Tmax Output short Circuit Current Output Voltage Swing Tamb = +25°C ±Vopp Tmin ≤ Tamb ≤ Tmax RL RL RL RL = 10kΩ = 2kΩ = 10kΩ =2kΩ ±12 ±12 70 70 10 12 10 12 10 0.25 90 25 14 13 40 mA V Min. Typ. 1 Max. 5 6 nA 2 30 70 nA 10 100 200 V/mV 50 25 77 77 200 dB 90 mA 1.7 2.8 3.3 V Unit mV

Iio

Iib

Avd

SVR

ICC

Vicm

dB

CMR IOS

SR tr Kov Ri GBP THD en ∅m

Slew Rate Vi = ±10V, R L = 2kΩ, CL = 100pF, unity Gain Rise Time Vi = ±20mV, R L = 2kΩ, CL = 100pF, unity Gain Overshoot Vi = 20mV, RL = 2kΩ, CL =100pF, unity Gain Input Resistance Gain Bandwith Product Vi = 10mV, R L = 2kΩ, CL = 100pF, f =100kHz Total Harmonic Distortion f = 1kHz, Av = 20dB, R L = 2kΩ, Vo = 2V pp, C L = 100pF,Tamb = +25°C Equivalent Input Noise Voltage f = 1kHz, Rs = 100Ω Phase Margin

V/µs 0.5 µs 0.3 % 5 0.3 0.7 2 1 % 0.06 23 50 nV ----------Hz Degrees MΩ MHz

3/5

UA741
PACKAGE MECHANICAL DATA 8 PINS - PLASTIC DIPMillimeters Dim. Min. A a1 B b b1 D E e e3 e4 F i L Z 0.51 1.15 0.356 0.204 7.95 2.54 7.62 7.62 6.6 3.18 5.08 3.81 1.52 0.125 Typ. 3.32 1.65 0.55 0.304 10.92 9.75 0.020 0.045 0.014 0.008 0.313 Max. Min.

Inches Typ. 0.131 0.065 0.022 0.012 0.430 0.384 0.100 0.300 0.300 0260 0.200 0.150 0.060 Max.

4/5

UA741
PACKAGE MECHANICAL DATA 8 PINS - PLASTIC MICROPACKAGE (SO)
L C a3 b1 c1

a2...
tracking img