There are many ways to wash the exterior of a car, but this is a good way that most people use when washing their car at home. Cleaning the exterior of a cartakes three different steps. These steps are soaking, rinsing and drying. To get started, the materials needed are dry microfiber towels, paper towels, glass cleaner, car shampoo, a car sponge, atire brush, one bucket and a hose. Remember to park the car in a shaded place and do not forget to roll up the windows. Use old clothes and have fun washing your car.
First, soak the car to helpdrag particles, like mud and bird droppings, away from the vehicle. Collect all the materials and place it near where the car going to be washed. In an empty bucket, mix car shampoo with a littlewater. Take the car sponge and dip it into the bucket of soapy water. After that, hold the hose and soak the car thoroughly to loose dirt, making sure the water reaches the most difficult places suchas tires and wheels. After that, soap the car with the soapy sponge and scrub in circular motions over all the surface to clean away the debris. Use the tire brush to clean the wheel rims andtires.
Second, rinse the car with enough water to remove the soap. Start at the top and continue with the windows until you remove the soap completely. Be sure to remove all shampoo residue in orderto no leave marks on the car.
Third, the finishing steps in the washing process is to dry the car and clean the windows. When finished rinsing the car, take the dry towels and dry thesurface of the car completely. Pass the towel over the surface of the car without putting too much pressure to prevent denting. Then, using the paper towels and glass cleaner, spray each window of thecar and clean them one at the time. Make sure the vehicle is well dried to avoid stains caused by dust and dirt trapped in the water droplets.
In conclusion, this method of car washing helps...