Informacion Resinas Abs Para Inyeccion
Document ID
ABS–HI100Y
Issued Date
2008.05.13
Revised Date
Material Safety Data Sheet
(MSDS)
2008.05.13
Page
1 of 5
1. Chemical Product & Company Identification
a. Chemical Product Name
b. Usage
c. Chemical Type
d. Company's Address
e. Phone / Fax number
f. Prepared By
Acrylonitrile, 1,3 Butadiene, and Styrene Co-polymer
ElectronicGoods, Automotive Parts, Package, etc
Thermoplastics
LG Chem, Ltd. 20, Yeouido-dong, Yeongdeungpo-gu, Seoul, 150-721, Korea
82-2-3773-7449, 3634 / 82-2-3773-3310
ABS/EP Division
2. Composition / Information On Ingredients
CAS Number
a. ABS (Acrylonitrile-Butadiene-Styrene terpolymer)
b. Typical Antioxidants
c. Typical Lubricants
Contents
9003-56-9
97 - 100%
0 - 1%
0 - 2%3. Hazards Identification
a. Threshold Limit
Not available
b. Effect of overexposure
• Eye Contact
Solid or dust may cause irritation or corneal injury due to mechanical action
• Skin Contact
Essentially nonirritating to skin, Mechanical injury only
• Skin Absorption
Unlikely due to physical properties
• Ingestion
Unlikely due to physical state.
• Inhalation
Dustmay cause irritation to respiratory
In case of breathing, fumes released from heated material
may cause respiratory irritation
• Chronic Effects
Not Available
• Mutagenicity
Not Available
Grade : ABS Resin HI100Y
Document ID
ABS–HI100Y
Issued Date
2008.05.13
Revised Date
Material Safety Data Sheet
(MSDS)
2008.05.13
Page
2 of 5
4. First AID
a. EyeContact
Immediately rinse eyes with copious amount of running water
and seek medical advice
b. Skin Contact
Essentially nonirritating to skin but rinse with copious water
c. Ingestion
If vomiting occurs, lower the head to ease vomiting and seek for medical
Advice
d. Inhalation
In case of breathing, fumes released from heated material may
cause respiratory irritation
Incase of inhaling dense smoke, immediately remove a
person to fresh air. If necessary, apply artificial respiration
and seek medical attention immediately
e. Mutagenicity
Not Available
5. Fire Fighting Measures
a. Flammable Properties
• Flash Point
• Method Used
• Auto ignition Temperature
• Flammability
349 ℃ (660 F)
Not applicable
>400 ℃ (>752 F)
1/16” HB (UL-94.File No.E6717M)
b. Extinguishing Media
Usually use water and use extinguishing media appropriate to
surrounding conditions
c. Special Fire Fighting Procedure
Cool Containers with water spray. In closed stores, provide fire
fighter with self-contained breathing apparatus in positive
pressure mode
d. Usual Fire and Explosion Hazards
Irritating gases and dense smoke
6. Accidental ReleaseMeasures
a. Personal Precautions
Pellets or beads may present a slipping hazard
b. Environmental Precautions
Keep out of irrigation ditches, sewers, and water supplies
Spills should be collected to prevent contamination of waterways
c. Cleanup
Sweep up
Grade : ABS Resin HI100Y
Document ID
ABS–HI100Y
Issued Date
2008.05.13
Revised Date
Material Safety DataSheet
(MSDS)
2008.05.13
Page
3 of 5
7. Handling and Storage
a. Handling
Avoid formation of dust
Keep bags always closed / Keep container lightly closed
Avoid pellets / bags from getting wet
b. Storage
Keep bags / containers in a well-ventilated place
Avoid pellets / bags from getting wet
8. Exposure Controls / Personal Protection
a. Engineering Controls
Good generalventilation should be sufficient for most conditions.
Local exhaust ventilation may be necessary for some operations
b. Personal Protective Equipment
• Eye / Face Protection
Use safety glasses. If it is a potential for exposure to particles which
could cause mechanical injury to the eye, wear chemical goggles
• Skin Protection
No Precautions other than clean body-covering clothing...
Regístrate para leer el documento completo.