Informatica

Product Release Notes: NComputing vSpace® Software for the L-series version L-4.9.5
These release notes contain important information regarding the newest available vSpace software release for your L-Series NComputing desktop virtualization kits. Please read this entire document prior to installation. Product: NComputing vSpace for L-Series devices Version: L-4.09.005.11 (or L-4.9.5.11) for32-bit versions of Microsoft Windows Server 2003 R2 and Windows XP* Supported Hardware: NComputing L-series family of products** including the L300.

What’s New – Summary:
This is a maintenance release that replaces the previous vSpace L-4.9.4.8 release. The following is a summary of the key changes, please read the rest of these Release Notes for more details on additional items that have changedand known errata:  Improvements to USB support for the L300 that increase USB transfer speeds by 3-4X and improve overall performance and stability New firmware version 1.4.1 for the L300 access device with improvements to USB support, to network packet handling, and to the device’s user interface. Video streaming improvements: added scroll protect feature and replaced “blue flash” with much lessnoticeable black flash. Improved MSI installer – eliminates errors that would occasionally occur when installing vSpace virtual device drivers and simplifies the installation to only require a single .msi file New error messages that assist troubleshooting: when Lseries devices cannot connect to a vSpace host, in most cases a text message will now be displayed describing the problem (e.g. “triallicense expired”) – instead of only displaying a black screen









Important notes and tips on this release:
 Upgrading an existing L-series vSpace host: to upgrade from the previous vSpace L-4.9.4.8 release, simply run the new .MSI installer for L-4.9.5.11. on top of the existing installation. Note however, that if you are using ANY beta version of software (e.g. L-4.9.5.7)you must first uninstall the beta and then run the new .msi installer for L-4.9.5.11. The vSpace L-4.9.5.11 installer will notify you of this if you try to install on top of a beta vSpace version. Also note that you will also need to run the registration wizard again, if you updated from beta software. Registration Required: All vSpace releases include a trial license and must be registered toallow L-series device operation beyond 1 hour of session time. If you are updating from a previous registered vSpace version and chose to uninstall its license information during the update, you must run the Registration Wizard and register this version before your L-series devices will be able to connect to this host. Update of L300 Firmware Required: This release includes new firmware for the L300access device (firmware version 1.4.1). You need to update the firmware on your L300 devices to benefit from all the improvements in this version of vSpace. (Once you update your firmware, you must use this latest vSpace release, otherwise USB will not function). Note that if your L300s have a very old version of firmware, you may need to perform the update process twice in order to get to firmwareversion 1.4.1 (you can check the firmware version from the NCconsole at C:\Program Files/NComputing/NComputing vSpace/NCCON.exe or by viewing the Information screen in the L300 firmware interface). If after your first firmware update you see that the device has not updated to 1.4.1, simply repeat the firmware update process (either manually from the L300 device or “pushed” from the NCconsole). Donot install on a system previously used as a U-series or X-series host: This release is only intended to be installed on a clean OS or to upgrade a current L-series vSpace host. Do not install it on an OS where vSpace for the U- or X-series was previously installed. Escaping out of Autoconnect: When autoconnect is enabled and you wish to access the L300 setup screens, use the "Esc" key during...