Inner jacket

Solo disponible en BuenasTareas
  • Páginas : 2 (257 palabras )
  • Descarga(s) : 0
  • Publicado : 9 de diciembre de 2011
Leer documento completo
Vista previa del texto
Fluoropolymer inner jacket
Aramid yarn strength member
Central filler/strength member
Tight buffered optical fiber
Optical fiber
Ripcord
Fluoropolymerouter jacket
Aluminum interlocking armor
(All dimensions are in mm., drawing not to scale)
Fiber type Singlemode, low water peak
Cladding diameter125 um
Primary Coating Diameter (UV cured acrylate) 245 um
Secondary Buffer Diameter 900 um
Proof test level 100 kpsi
Wavelength 1310 nm1550nm
Attenuation 0.5 dB/km 0.5dB/km
Nominal Zero Dispersion Slope 0.092 ps/(nm2-km)
INNER CABLE ENTIRED ARMORED CABLE
Cable diameter 6.2mm(0.24 in) 11.0 mm (0.43 in)
Inner cable weight 31 km/km (21 lbs/1000’)
Total cable weight 128 kg/km (86 lbs/(1000’)
INSTALLATION
Max. Tensileload 2,700 N (600 lbs) 2,700 N (600 lbs)
Min. Bend Radius 9.3 cm (3.6 in) 16.5 cm (6.5 in)
OPERATING
Max Tensile load 600 N (135 lbs) 600 N (135lbs)
Min Bend Radius 9.3 cm (3.6 in) 11.0 cm (4.3)
IMPACT RESISTANCE 1000 impacts 20 impacts
CRUSH RESISTANCE 1500 N/cm 650 N/cm(EIA-455-41A)
OPERATING TEMPERATURE -40ºC to +85ºC 40ºC to +85ºC
STORAGE TEMPERATURE -40ºC to +85ºC -40ºC to +85ºC
INSTALLATION TEMPERATURE 0ºC to +60ºC(actual temperature of cable)
FLAME RETARDANCY UL Listed Type OFNP UL Listed Type OFNP
(ANSI/NFPA-262) (ANSI/NFPA-262)
NOTE: SEE APPLICATIONENGINEERING NOTE: INTERLOCKING ARMOR CABLE PULLING GRIP INSTALLATION PROCEDURE.
PREVIOUSLY DX12-070K-SLX-900-OFCP-JAK DX012KSLX9YP16 9/30/08 (D121AZ)
tracking img