Jjjjjj

Solo disponible en BuenasTareas
  • Páginas : 13 (3016 palabras )
  • Descarga(s) : 0
  • Publicado : 6 de marzo de 2011
Leer documento completo
Vista previa del texto
____________________________________________________________

____________________

MAPPER 2.1 PLUG-IN MANUAL for
____________________________________________________________

____________________

MANUAL REVISION: 2.1 DATE: 26/03/2007 REVISED BY: MAX MORA DJ(MORAMAX) NOTE: IN RED DIFFERENCE BETWEEN LAST RELEASE 1.1

1

INSTALLATION INSTRUCTIONS 1) Execute BCD2000_2_1.EXE. Themapper will be installed 2)Go in the performance menu’ and set like the following picture. Make sure to set latency to “auto”.

Pic.1 3)Open config menu’ and audio set-up and make this configuration of pic.2. Make sure to set ASIO mode and not BCD2000 mode.

Pic.2

2

2)Open Virtual dj 4.1 and go in the following screen and see if the plug-in if loaded like ti pic. 3:

Pic.3 4)Go in theperformance menu’ and set like the following picture. Make sure to set latency to “auto”. 5)to be sure if the bcd2000.dll is in the right place see :

Pic.4 5)Close and open again VirtualDJ. If you have some audio problems you can see this blog: http://www.virtualdj.com/blog/moramax/
3

INTRODUCTIONS
I suggest to use the standard skin VirtualDJ: Internal mixer or VirtualDJ: Full Video

KEYFUNCTION OF MAPPER 1.0
The new mapper works in two modality: -PLAY MODE: playing functions -BROWSE MODE: browsing function The key ON-AIR(N.3) it’s the dedicated key to switch to play and browse mode and some keys has double function dependent of this status. On release 2.0 you have the possibility to use two modality to switch browsing mode. See APPENDIX A for more details.

1 2

MASTER KNOBTALKOVER

adjust master out volume In play mode: active video effect In Browse mode: to browse video transition and video effect with left and right jog wheel switch play mode to browse mode (See appendix A) 4

3

ON-AIR

4 5 6 7

PHONES SPLIT FX CONTROL A FX CONTROL B FX CONTROL C

play mode: switch crossfader audio and video to only crossfader video -In play mode: start audio sampleselected on left deck -In browse mode: browsing samples with left jog wheel -In play mode: start audio effect selected on left deck -In browse mode: browsing samples with left jog wheel -In play mode: start audio effect selected on right deck -In browse mode: browsing samples with right jog wheel -In play mode: start audio sample selected on right deck -In browse mode: browsing samples with rightjog wheel -In play mode: if is pressed with BEND +/-(27,28) adjust fine pitch of left deck -In browse mode: open/close folder, load song into the left deck -In play mode: if is pressed with BEND +/-(27,28) adjust fine pitch of right deck -In browse mode: open/close folder, load song into the left deck

8 9

FX CONTROL D SOURCE A

10

SOURCE B

11 12 13 14 15 16 17

HEADPHONE KNOBadjust the headphone volume SEARCH back -to seek song backward -ANALOG INPUT A/B(9,10) +SEARCH(12): to seek more fast

SEARCH forward -to seek song forward -ANALOG INPUT A/B(9,10) +SEARCH(13): to seek more fast BASS KNOB MID KNOB HIGH KNOB GAIN KNOB to adjust the bass on the left/right deck to adjust the mid on the left/right deck to adjust the high on the left/right deck to adjust the volume gain onthe left/right deck SEE APPENDIX D FOR NEW GAIN WORKING MODE -if deck is in play set to 0 the bass in the left/right deck -if deck is in pause set cue points 1 and led flash to confirm -if it’s pressed with ANALOG INPUT A/B (9-10) delete cue 1 -if the deck is in play set to 0 the mid on the left/right deck -if the deck is in pause set cue points 2 and led flash to confirm -if it’s pressed withANALOG INPUT A/B (9-10) delete cue 2

18

KILL BASS

19

KILL MID

5

20

KILL HIGH

-if the deck is in play set to 0 the high on the left/right deck -if the deck is in pause set cue points 3 and led flash to confirm -if it’s pressed with ANALOG INPUT A/B (9-10) delete cue 3 -increase loop length on the left/right deck (see APPENDIX B) -ANALOG INPUT A/B(9,10)+BACK TO TOP A/B(21):...
tracking img