Manual de control steren

IMPORTANT
Before using your new Universal remote control, please read the following recommendations. • • Clean only with a soft, dry cloth. You need to re-program your remote control after remove the old batteries. After removing the batteries, the memory will be ereased immediately, that’s why you need to keep the actual programmed codes.

FEATURES
• • • • Universal Remote Controlmultifunction RCA. You can control most brands of TV, VCR, VCD / DVD, LD / CD, CATV, Satellite and AUX. Manages up to 8 units at the same time, has 36 keys which include the main functions as Mute (Mute), Menu and Timer. Its design is very modern, this is super lightweight and durable plastic manufactured in black.

ENGLISH-02

ENGLISH

CONTROLS
1.- Power Turns the selected device on / off 2.-Devices Keys Select the type of the devices that you want to control (TV, DVD, etc) 3.- Indicating LED 4.- Numerical Keys Provide the functions just like your original remote, such as the direct access to program/channel selection. 5.- Set You can program the remote control 6.- Video Keys DVD / VCR functions keys 7.- Channels (Ch) These keys has the same functions as your original remote control. 8.-Volume (Vol) Set the volume level.
ENGLISH-03

3 1

5 9

2 8

10 7

4 6

ENGLISH

10.- Mute Disable TV sound

HOW TO USE THE QUICK PROGRAM METHOD
Before using your new Universal Remote Control be sure that you has installed 3 new alkaline batteries type AAA or with enough charge. You can use the quick program with the enlisted codes, that you can see on the next pages. If yourdevice does not respond or is not functioning properly, please try with each code listed for your This kit is ideal for electronic students or hobbyists because brand. If it’s necessary, try the Search Method. 1.- Press and hold SET. Then press the corresponding key, to program your desired device (TV, DVD, VCR, etc). The indicating LED turns on. 2.- Find the code for your device in the codes listand enter the 3 digits code. The indicating light turns off. 3.- Now aims the remote control at your device, and press POWER. If your device switch on, you are ready to operate the device. Ckeck that your device works properly with the remote control. If your device does not respond or is not functioning properly, please try with each code listed for your brand, repeating from step 1 to 3. If isnecessary, try the Search Method.
ENGLISH-04

ENGLISH

9.- TV / AV Switch the signal between TV and Video

Do not exceed more than 10 seconds between each step. Otherwise, the remote control exit from the Program Mode and you must start again. This kit is ideal for electronic students or hobbyists because Probably there are more than one code for your device, but only it allows them todevelop creativity in the programming the one of them will control almost the total of functions, try to find of moreprototype of code for your brand. this appropriated a mechanical system. This kit includes all 1.- Switch your device on (not in Stand By).

AUTOMATIC SEARCH METHOD

2.- Aim the remote control at your device during the automatic search method. 3.- Press and hold SET button. Thenpress the corresponding key, to program your desired device (TV, DVD, VCR, etc). The indicating LED turns on. 4.- Release the keys. Press the SET button once again. The indicating LED will be blinking and the search begins. 5.- Press POWER (1) constantly -256 times max *-, until your device turns off. IF the equipment turns off, IMMEDIATELY release THE power button. 6.- Press the button of theprogrammed device (TV, DVD, etc.). The remote control store the code for your device and exit from Search Mode.
ENGLISH-05

ENGLISH

Be patient. If your device don’t turn off after few tries pressing Power, repeat from step 2. Do not press different buttons as we mentioned in this instruction This kit is ideal for electronic students or hobbyists because manual. it allows them to develop seconds...