The 10 SEER Series condensing unit is the outdoor part of a versatile system of air conditioning. It is designed to be custom-matched with one of UPG’s complete line of evaporator sections, each designed to serve a specific function. Matching air handlers are available for upflow, downflow, or horizontal applications to provide a complete system.Electric heaters are available if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces and air handlers.
SPLIT-SYSTEM AIR CONDITIONERS 10 SEER AM012M102 THRU AM030M1021 (1 THRU 2.5 NOMINAL TONS, 1 PH)
5-year limited parts warranty. 5-year limited compressor warranty.
• QUALITY CONDENSER COILS - The coil isconstructed of enhanced copper tube and aluminum fins. • COIL PROTECTION - Coils are protected from damage by a polymer mesh applied between the coil face, and a PVC coated steel coil guard. • PROTECTED COMPRESSOR - Recip compressors are internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor whichprotects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compressor. • DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint-to-steel bond, which resists corrosion and rust creep. Special primer formulas and matted desert sand finish insure less fading when exposed tosunlight. • LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. • TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and anylandscaping. This allows compact location on multi-unit applications. • LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise up away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. • LOW MAINTENANCE - Long lifepermanently lubricated motor-bearings need no annual servicing. • EASY SERVICE ACCESS - Fully exposed refrigerant connections and a single panel covering the electrical controls make for easy servicing of the unit. • SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. • U.L. AND C.U.L. LISTED -Approved for outdoor application. Certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240.
MA N U F A C T U R
T O ARI
I CA T
S EC 10 S T A NDA R D 2
U I P M ENT
G W IT H
NI N G
This product was manufactured in a plant whose quality system is certified/registered as being in conformity with ISO 9001.
Certification applies only when the complete system is listed with ARI.
Due to continuous product improvement, specifications are subject to change without notice. Visit us on the web at www.york.com for the mostup-to-date technical information. Additional rating information can be found at www.ariprimenet.org.
FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE
036-21573-001 Rev. A (0304)
Physical and Electrical Data
Unit Supply Voltage Normal Voltage Range 1 Minimum Circuit Ampacity Max. Overcurrent Device Amps Compressor Type Compressor Amps Crankcase Heater Fan Motor...