Manual de operación

Solo disponible en BuenasTareas
  • Páginas : 24 (5872 palabras )
  • Descarga(s) : 0
  • Publicado : 29 de febrero de 2012
Leer documento completo
Vista previa del texto
Model 920


Digital Transducer Instrument Instruction Manual






















Instrument Part No. 080920-01000


Table of Contents

1.0 Preliminaries 2

1.1 Precautions 2
1.1.1 Site Considerations 2
1.1.2 Handling 2
1.1.3 Cleaning 2
1.1.4 On Re-packing 2
1.1.5 Before You Begin 2
1.2 Introduction 21.2.1 How to Use This Manual 2
1.2.2 Model 920 Operation Overview 2
1.2.3 Transducer Selection 2
1.2.4 Test Setup 2
1.2.5 Data Recording 2
1.2.6 Viewing Data 2
1.2.7 Data Storage & Upload 2
1.3 Connections 2
1.3.1 Printer/Computer Upload 2
1.3.2 Pinouts 2

2.0 Preparation 2

2.1 The Main Screen 2
2.2Cal Screen Overview 2
2.3 Setup Screen Overview 2
2.4 Store Screen Overview 2
2.5 Utilities Screen Overview 2

3.0 Instrument Setup 2

3.1 Starting Up the 920 2
3.2 Transducer Setup 2
3.2.1 Set Up RS Technologies Transducer 2
3.2.2 Set Up Custom Transducer 2
3.3 Test Setup 2
3.4 Changing Frequency Response 2

4.0 Operation 2

4.1Taking Data 2
4.2 Reviewing Data & Statistics 2
4.3 Printing Data and Statistics 2
4.4 Sending Data to a Computer 2
4.5 Erasing Data 2
4.6 Setting Data & Time 2
4.7 Setting Baud Rate 2
4.8 Procedure for Counting Angle in Diagnostic Mode 2

5.0 Other Information 2

5.1 Specifications 2
5.2 Testing Hand Torque Wrenches 2
5.2.1 Equipment Required 25.2.2 Setting Up The Model 920 2
5.2.3 Testing Hand Wrenches 2




Preliminaries



1 2 PRECAUTIONS

Please observe the following precautions.


1 Site Considerations

The Model 920 is a portable instrument. It can operate for up to 8 hours on the fully charged internal battery.

Since the Model 920 is computer equipment, take the same precautions with it asyou would a portable or laptop personal computer.

Do not set up or operate in close proximity to heat sources such as radiators or air ducts.


2 Handling

The Model 920 is a durable design, but avoid situations that will induce vibration and avoid dropping the instrument.


3 Cleaning

Since The Model 920 instrument is computer equipment, use the same cleaning routine as you wouldfor a laptop computer. The Model 920 is not watertight so do NOT let the unit get wet. Keep solvent type cleaners away from the front panel display. Care for the keypad as you would for a personal computer.



4 On Re-packing

Do not throw away the shipping carton and packing materials if possible. They make an ideal container in which to transport the unit should it need to be shipped toanother site. A carrying case (PN 38180-000960) is available from RS Technologies.


5 Before You Begin


NOTE
Notes in this manual are enclosed in shaded boxes such as this one.

Check the packing list to be sure that all equipment, transducers, cables, and other accessories were shipped with your meter.

If you have any questions about this unit, its setup and operation do not hesitateto contact your RS Technologies distributor, representative, or the factory for technical support.





3 Introduction

This introduction provides an overview of the manual and the Model 920 instrument.


1 How to Use This Manual

This manual is arranged to help you quickly find the information you need for the operation of the Model 920. The manual consists of the following sections.□ Preliminaries, Section 1.0, provides an introduction to the instrument and the manual
□ Preparation, Section 2.0, provides and overview of the instrument
□ Instrument Setup, Section 3.0, describes transducer and test setup
□ Operation, Section 4.0, covers taking data with the Model 920
□ Other Information, Section 5.0, provides specifications and other information
To locate a...
tracking img