Manual De Reloj Orient

ENGLISH CHRONOGRAPH
INSTRUCTION MANUAL
Thank you for your purchase of our product. To ensure prolonged use and optimum performance, please read this Instruction Manual carefully and familiarize yourself with the terms of the guarantee. Please keep this Instruction Manual in your hand and refer in time of need.

◆ Function
• TIME/CALENDAR • ALARM Alarm can be set at every 1 minute within thecoming 12 hours. • STOPWATCH Stopwatch can count up to 60 minutes in 1/5 second increments.

◆ Specifications
(1) Crystal oscillator frequency 32,768 Hz (Hz= Oscillations per second) (2) Wrist-worn accuracy (at normal temperature) Mean monthly rate: ± 20 sec. Alarm accurancy: ± 1 minute. (3) Operating temperature range –5°C ~ +50°C (4) Drive system Step motor (5) Battery Silver oxide batterySR927W (6) Battery life Approx. 3 years from installation in case that alarm is used once (for 20 seconds) and stopwatch for 2 hours a day. (7) IC (Integrated Circuit) C-MOS-1C ; 1 piece * The above specifications are subject to change without notice for improvement. 1

◆ Names and functions of individual component parts
Button A Crown

Second step (time settings, hand position settings)First step (date setting, alarm time setting) Normal position Button B * Some models use crowns and / or buttons with screw-lock mechanism. * In case that explanation is not necessary, hands are omitted in the following descriptions.

2

◆ Time Setting/0-Position Setting of Stopwatch Hands (Basic Watch/Alarm Mini-watch/Stopwatch Hands)
Both the time setting (basic watch and mini-alarm-watch) andthe 0-position setting of stopwatch hands are performed in the second step of the crown. Therefore, check and confirm, or reset the following three items and then press in the crown, when the crown is pulled out to the second step for time setting, etc. – Time of basic watch – Time of mini-alarm-watch – 0 positions of stopwatch hands (2 hands) Stopwatch hands (minute hand, second hand) CrownBasic watch (hour, minute, and small-second hand) Mini-alarm-watch (hour, minute) [Setting the time (basic watch and mini-alarm-watch)] Pull the crown out to the second step. Then, the small-second-hand will stop. Stop the small-second-hand at the 12 o’ clock position. Small-secondhand The mini-alarm-watch indicates the current time. * The stopwatch will be reset by force if the above-mentioned actionis taken during stopwatch timing. * In case the mini-alarm-watch is indicating an alarm time (alarm is set), the minialarm-watch will fast-forward and indicate the current time. 3

Turn the crown and perform time-setting of the basic watch.

Regarding the time you set in this case, we recommend that you set the time that is several minutes advanced. It is because you will subsequentlyperform [time setting of the mini-alarm-watch] and then [0-position setting of the stopwatch hands]. You will have to press in the crown after completing all the settings, and accordingly it becomes necessary to set the time several minutes ahead. * The date changes at 12 o’ clock midnight. Set it without mistaking a.m. with p.m. or vice versa. * At that time, advance the minute hand 4 ~ 5 minutes fromthe correct time, and bring the hand back, to the correct time in order to set time accurately. Then, press Button B and perform time-setting of the mini-alarm-watch. Set it to the same time as that of the basic watch set at above. Continued pressing of Button B results in fast-forwarding.

Button B * The mini-alarm-watch does not come with the 24-hour option of a.m. and p.m.

4

Then,perform 0-position setting of two stopwatch hands. Continue pressing Button A for about 2 seconds and the stopwatch minute hand will make one round. Press Button B and set the stopwatch minute hand to the 0-minute position. Continued pressing of Button B results in fast-forwarding. Stopwatch minute hand Stopwatch second hand Button A

Button B Subsequently, continue pressing Button A for about 2...