Manual Hse

EQUIPOS FLUKE
5500A-SC300
300 MHz Oscilloscope Calibration Option
* -------------------------------------------------
Highlights
* -------------------------------------------------Description
* -------------------------------------------------
Specifications
 
Wide workload coverage gets even wider.
The SC300 enables the versatile
5500A and the enhancedperformance 5520A to calibrate the most widely used analog and digital oscilloscopes up to 300 MHz. It is a plug-in module that fits inside the 5500A or 5520A Multi-Product Calibrator. It can be ordered factoryinstalled with a new calibrator, or added later at a Fluke service center for an additional installation and calibration charge.
Fluke Calibration offers more ways to match the rightoscilloscope calibration tools with your workload and budget. If your workload includes oscilloscopes above 300 MHz, you will want to take a look at the
5500A-SC600 option for the 5500A/5520A Multi-ProductCalibrators or the 5500A-SC1100 option for the 5520A Multi-Product Calibrator. And if your workload includes primarily oscilloscopes above 600 MHz, see our 5820A dedicated oscilloscope calibrator.5500A/COIL
50-Turn Current Coil

* -------------------------------------------------
Highlights
* -------------------------------------------------
Specifications
Supports thecalibration of clamp-type current meters
The 50 Turn 5500A/COIL is used as a tool for calibrating clamp type current meters that operate by two different principles -- as current transformers (AConly), and by the Hall Effect (Both AC and DC). It is impractical to calibrate 1000A rated current clamp meters using a 1000A source. However, by using the 50 turns of the 5500A/COIL in conjunctionwith a current calibrator you can effectively multiply the current of the current calibrator by a factor of 50 to support the calibration and verification of these clamp-on current meters.