Manual

Solo disponible en BuenasTareas
  • Páginas : 92 (22827 palabras )
  • Descarga(s) : 0
  • Publicado : 9 de noviembre de 2011
Leer documento completo
Vista previa del texto
MODEL

AL-1215 AL-1530CS AL-1540CS AL-1551CS
DIGITAL LASER COPIER DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL
Page

INTRODUCTION
AL-1215/AL-1530CS

4 7 14 19 46 52 57 61 68

SETTING UP THE UNIT LOADING PAPER INSTALLING THE SOFTWARE MAKING COPIES SPECIAL FUNCTIONS

AL-1540CS

MAINTENANCE TROUBLESHOOTING THE UNIT APPENDIX

AL-1551CS

FOR YOUR PROTECTION...
To aid inreporting this unit in case of loss or theft, please record below the model number and serial number located on the back of the unit. We also suggest you record all the information listed and retain for future reference. MODEL NUMBER DATE OF PURCHASE Dealer Address State Service Station Address State Zip City Telephone Zip City Telephone SERIAL NUMBER

To obtain service, or to obtain productliterature, accessories, or supplies, please call or 1-(630)378-3590 in the USA 905-568-7140 in Canada.

For customer assistance, please visit http://www.sharp-usa.com (for USA) or http://www.sharp.ca (for Canada) on the World Wide Web or call 1-(630)378-3590 (for USA).

CAUTIONS
Caution label on the unit
The label ( ) in the fusing area of the unit indicates the following: : Caution, risk ofdanger : Caution, hot surface

Cautions on using
Follow the cautions below when using this unit.

Warning:
• The fusing area is hot. Exercise care in this area when removing misfed paper. • Do not look directly at the light source. Doing so may damage your eyes. • Do not switch the unit rapidly on and off. After turning the unit off, wait 10 to 15 seconds before turning it back on. • Unit powermust be turned off before installing any supplies.

Caution:
• Place the unit on a firm, level surface. • Do not install the unit in a humid or dusty location. • When the unit is not used for a long time, for example for consecutive holidays, turn the power switch off and remove the power cord from the outlet. • When moving the unit, be sure to turn the power switch off and remove the powercord from the outlet. • Do not cover the unit with a dust cover, cloth or plastic film while the power is on. Doing so may prevent heat radiation, damaging the unit. • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • The socket-outlet shall be installed near the unit and shall be easily accessible.Important points when selecting an installation site
Do not install your unit in areas that are: • damp, humid, or very dusty • exposed to direct sunlight • poorly ventilated • subject to extreme temperature or humidity changes, e.g., near an air conditioner or heater. Be sure to allow the required space around the 8" (20cm) machine for servicing and proper ventilation.

4" (10cm)

4" (10cm)

1 Cautions on handling
Be careful in handling the unit as follows to maintain the performance of this unit. Do not drop the unit, subject it to shock or strike it against any object. Do not expose the drum cartridge to direct sunlight. • Doing so will damage the surface (green portion) of the drum cartridge, causing smudges on copies. Store spare supplies such as drum cartridges and TDcartridges in a dark place without removing from the package before use. • If they are exposed to direct sunlight, smudges on copies may result. Do not touch the surface (green portion) of the drum cartridge. • Doing so will damage the surface of the cartridge, causing smudges on copies.

Trademark acknowledgements
• Microsoft and Windows are trademarks of Microsoft Corporation in the U.S.A. andother countries. • IBM and PC/AT are trademarks of International Business Machines Corporation. • Adobe and Acrobat are trademarks of Adobe Systems Incorporated. • All other trademarks and copyrights are the property of their respective owners. As an ENERGY STAR® Partner, SHARP has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.

For users in the USA
Safety...
tracking img