Mechanic

Solo disponible en BuenasTareas
  • Páginas : 8 (1873 palabras )
  • Descarga(s) : 0
  • Publicado : 1 de diciembre de 2011
Leer documento completo
Vista previa del texto
Tools

1. Battery electrolyte tester

A handy tool for transferring sulfuric acid from a car battery to the inside of your toolbox after determining that your battery is dead as a doornail, just as you thought.

Example: We used a battery electrolyte tester in fisic class.



2. Drill Press
A tall upright machine useful for suddenly snatching flat metal bar stock out of your handsso that it smacks you in the chest and flings your beer across the room, splattering it against that freshly painted part you were drying.
Example: They buy a drill press for there workroom.

3. Electric hand drill
Normally used for spinning steel Pop rivets in their holes until you die of old age, but it also works great for drilling mounting holes in fenders just above the brake line thatgoes to the rear wheel.
Example: Jeremy needed a electric hand drill so he could make a hole in the wall.

4. Hammer
Originally employed as a weapon of war, the hammer nowadays is used as a kind of divining rod to locate expensive parts not far from the object we are trying to hit.
Example: Every carpenter needs a hammer to make his work.

5. Hose cutter
A tool used to cut hoses ½ inchtoo short.
Example: Sarah cut the cable with her hose cutter.

6. Hydraulic floor jack
Used for lowering a car to the ground after you have installed new front disk brake pads, trapping the jack handle firmly under the front fender.
Example: We need a hydraulic floor jack to get the wheel off the car.

7. Oxyacetylene torch
Used almost entirely for lighting various flammable objects inyour garage on fire. Also handy for igniting the grease inside a brake drum you're trying to get the bearing race out of.
Example: They glued those metals with the oxyacetylene torch.

8. Phillips screwdriver
Normally used to stab the lids of old-style paper-and-tin oil cans and splash oil on your shirt; can also be used, as the name implies, to round off Phillips screw heads.
Example: Danielbuy a full set of phillips screwdriver.

9. Pliers
Used to round off bolt heads.
Example: She break that part with the pliers.

10. Trouble Light
The mechanic's own tanning booth. Sometimes called a drop light, it is a good source of vitamin D, "the sunshine vitamin," which is not otherwise found under automobiles at night. Health benefits aside, its main purpose is to consume 40-wattlight bulbs at about the same rate that 105-mm howitzer shells might be used during, say, the first few hours of the Battle of the Bulge. More often dark than light, its name is somewhat misleading.
Example: The light come out of the trouble light.

11. Two-ton hydraulic engine hoist
A handy tool for testing the tensile strength of ground straps and brake lines you may have forgotten todisconnect.
Example: Move the motor with the two-ton hydraulic engine hoist.

12. Vise-grips
Used to round off bolt heads. If nothing else is available, they can also be used to transfer intense welding heat to the palm of your hand.
Example: Unscrew the fastener with that vise-grips.

13. Whitworth sockets
Once used for working on older British cars and motorcycles, they are now used mainly forimpersonating that 9/16 or ½ socket you've been searching for the last 15 minutes.
Example: Put the whitworth sockets on the ratchet.

14. E-Z Out Bolt and Stud Extractor
A tool that snaps off in bolt holes and is ten times harder than any known drill bit.
Example: A stud extractor is a rare piece.

15. Wrench
Provide grip and mechanical advantage in applying torque to turn objects.Example: Gabriel's wrench broke.

16. Ratchet
Tool on which you can exert a great amount of force before the socket to which it is attached looses purchase on the rounded shoulders of the bolt with which it was engaged, resulting in the loss of skin on and around the knuckles.
Example: Every mechanic needs a ratchet for hes work.

17. Alan key
Tool for rounding off the inside of alan...
tracking img