No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respectivecompanies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that mayappear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequentialdamages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmfulinterference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CALIFORNIA, USA ONLY The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, pleasefollow the related regulations in advance. “Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate” ASRock Website: http://www.asrock.com
Published February 2007 Copyright©2007 ASRock INC. All rights reserved.
ASRock 775i65G Motherboard
Layout Motherboard Layout
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
PS2_USB_PWR1 Jumper ATX 12VConnector (ATX12V1) ATX Power Connector (ATXPWR1) 775-Pin CPU Socket North Bridge Controller CPU Fan Connector (CPU_FAN1) 184-pin DDR DIMM Slots (DDR1- 2) Secondary IDE Connector (IDE2, Black) Primary IDE Connector (IDE1, Blue) South Bridge Controller Secondary Serial ATA Connector (SATA2) Primary Serial ATA Connector (SATA1) Chassis Fan Connector (CHA_FAN1) System Panel Header (PANEL1) ChassisSpeaker Header (SPEAKER 1)
16 17 18 19 20 21 22 23 24 25 26 27 28 29
Infrared Module Header (IR1) Clear CMOS Jumper (CLRCMOS0) USB 2.0 Header (USB67, Blue) Floppy Connector (FLOPPY1) Serial Port Connector (COM1) AMR Slot (AMR1) Front Panel Audio Header (AUDIO1) JR1 / JL1 Jumpers Internal Audio Connector: CD1 (Black) Internal Audio Connector: AUX1 (White) PCI Slots (PCI1- 3) AGP Slot(1.5V_AGP1) BIOS FWH Chip Shared USB 2.0 Header (USB4_5, Blue)
ASRock 775i65G Motherboard
ASRock I/O Plus TM
1 2 3 4 5 6
Parallel Port RJ-45 Port Line In (Light Blue) Line Out (Lime) Microphone (Pink) Shared USB 2.0 Ports (USB45)
7 8 9 10 11
USB 2.0 Ports (USB01) USB 2.0 Ports (USB23) VGA Port PS/2 Keyboard Port (Purple) PS/2 Mouse Port (Green)
ASRock 775i65G Motherboard3
Thank you for purchasing ASRock 775i65G motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide....