Musculos

Dell 1320c, Xerox Phaser 6130/N
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
List of Printers:
Dell 1320c, Xerox Phaser 6130/N
List of OEM Cartridge Part Numbers:
Dell 1320c 1K yield:
Black –310-9059, Cyan – 310-9061, Magenta – 3109063, Yellow – 310-9065
Dell 1320c 2K yield:
Black – 310-9058, Cyan – 310-9060, Magenta – 3109062, Yellow – 310-9064
Xerox Phaser 6130/N:
Black (2.5K yield)– 106R01281, Cyan (1.9K yield) –
106R01278, Magenta (1.9K yield) – 106R01279, Yellow
(1.9K yield) – 106R01280

Step 2
Locate the waste tank tabs (see photo 2) and pull the toner tank
lip above thetabs to separate the toner and waste tanks (see
photo 3).
NOTE: Loosening the 4 tabs may release waste toner.
Vacuum or use dry compressed air to remove waste toner.
PHOTO 2

Tools Required:Small Flat Blade Screwdriver, Spring Hook
Supplies Required:
Soft Lint-Free Cloth, Vacuum or dry Compressed Air

PHOTO 3

Step 1
Position the cartridge with the chip cover facing you. Locate theedge of the sealing tape and carefully remove the tape (see
photo 1). Save the tape for reuse.
PHOTO 1

Step 3
Remove the tank separator plug (see photo 4).
PHOTO 4

© 2008 Future Graphics,LLC. All rights reserved. Future Graphics (FG) is a distributor of compatible replacement parts and products for imaging equipment. None of FG's products are genuine OEM replacement parts and noaffiliation or sponsorship is to be implied between FG and any OEM.

w w w. f u t u re g r a p h i c s l l c . c o m
REV. 01/29/08

1
DELL1320TECH

Dell 1320c, Xerox Phaser 6130/N
Toner CartridgeRemanufacturing Instructions
Step 4
Remove toner outlet cover (see photo 5).

Step 8
Clean the seal area on the toner tank (see photo 8).

PHOTO 5

PHOTO 8

Step 5
Clean any remainingtoner out using a vacuum or dry compressed air.
Step 6
Using a soft lint-free cloth, clean the seal area on the tank separator plug (see photo 6).

Step 9
Install the tank separator plug (see...