Vehicle-Mounted Elevating and Rotating Aerial Devices
Date of Publication: February 1, 2002
This Standard will become effective August 1, 2002
The design and manufacturing requirements of this standard apply to all aerial platforms manufactured on or after the effective date. All other provisions of this standard apply to both new andexisting units delivered by sale, lease, rental or for any form of beneficial use on or after the effective date. The effective date is established by the standards developer and not by the American National Standards Institute. This standard was developed under procedures accredited as meeting the criteria for American National Standards. The Consensus Committee that approved the standard wasbalanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed standard was made available for public review and comment which provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. The Scaffold Industry Association Inc. (SIA) does not “approve,” “rate,” or “endorse” anyitem, construction, proprietary device, or activity. The Scaffold Industry Association Inc. (SIA) does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable Letters Patent, nor assume any suchliability. Users of this standard are expressly advised that the determination of the validity of any such patent rights, and the risk of the infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this standard. The Scaffold IndustryAssociation Inc. (SIA) accepts responsibility for only those interpretations issued in accordance with governing ANSI procedures and policies which preclude the issuance of interpretations by individual volunteers.
Revision of ANSI A92.2-1990
American National Standard Vehicle-Mounted Elevating and Rotating Aerial Devices
Secretariat Scaffold Industry Association, Inc.Approved September 26, 2001 American National Standards Institute, Inc
American National Standard
Approval of an American National Standard requires verification by ANSI that the requirements for due process, consensus, and other criteria for approval have been met by the standards developer. Consensus is established when, in the judgment of the ANSI Board of Standards Review, substantialagreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made toward their resolution. The use of American National Standards is completely voluntary; their existence does not in any respectpreclude anyone, whether he has approved the standards or not, from manufacturing, marketing, purchasing, or using products, processes, or procedures not conforming to the standards. The American National Standards Institute does not develop standards and will in no circumstances give an interpretation of any American National Standard. Moreover, no person shall have the right or authority to issue aninterpretation of an American National Standard in the name of the American National Standards Institute. Requests for interpretations should be addressed to the secretariat or sponsor whose name appears on the title page of this standard. CAUTION NOTICE: This American National Standard may be revised or withdrawn at any time. The procedures of the American National Standards Institute require...