Obrasss

JF3 Freedom Bluetooth Headphones User Manual

EN 1
REGISTER YOUR LIFETIME WARRANTY NOW

1

Immediate registration of purchase date, place and receipt number required for your JayBird Lifetime Warranty Against Sweat jaybirdgear.com/intheclubnow

GOOD VS GREAT PERFORMANCE

2

Because everyone’s ears are di erent, make sure to try out all sizes of eartips. Only with the perfect size ofeartips will you enjoy a snug t and optimum sound quality.

EN 2

SECURE FIT FOR SPORT Finding the right size sports ear cushion will secure

EN 3

3

your buds and liberate your workout.

ONE MORE SECURE FIT OPTION To make sure all tting preferences

4

are covered, earhooks are included as an alternative secure t option.

EN 4

WHEN OUTDOORS USE AN ARMBAND (NOT YOUR POCKET)EN 5

5

Outdoors / gyms: Without walls or ceilings for the Bluetooth signal to bounce o , your body can block the signal to the headphones. For best signal performance, have your music device ABOVE waist level on your RIGHT side.

In the box

Charging for rst use Charging the battery before use is recommended but not required. The headphones ship pre-charged however initial charge willvary. Low battery is indicated by the status indicator blinking red with an audible tone every 20 seconds. Connect charging cable with the charging port of headphones under the USB cover on the right earpiece. Connect cable to the USB slot of any PC or Mac. The status indicator will be red while charging and will turn o when fully charged. JayBird also o ers an AC power adapter which your USBcable can plug into. AC power adapter sold separately.

In the box & rst use

JF3 Freedom Bluetooth Headphones Limited Edition Premium Magnet Sealed JayBird Carry Case 3 pairs regular eartips (S,M,L) 3 pairs secure tting sport ear cushions (S,M,L) 1 pair of optional ear hooks USB Cable User Manual

EN 6

EN 7

Secure Fit

Secure Fit

EN 8

Pair mode

Power on/o Push and hold centerbutton for 3-5 seconds

EN 9

Pairing & Power on/o

Begin with headphones powered o . Push and hold center button for 6-8 seconds until status light alternates red and blue. You are now in pair mode. See your phone/music device manual for pair instructions. Passcode is 0000.

8 sec

Pair Mode (detailed step by step instructions) 1. Keep the headphones and mobile phone in the range of 1meter when pairing. 2. Put the headphones into pairing mode by pushing the center button for 8 seconds (LED will ash red and blue). 3. Start the Bluetooth function on mobile phone and search for Bluetooth devices. After searched, select “JF3 Freedom” in the Bluetooth device list. 4. Enter password or PIN No:”0000” on your mobile phone when prompted. 5. If required, after successful pairing, select“JF3 Freedom” in the Bluetooth device list and press “connect”. 6. After successful connecting, the blue light blinks twice every 4 seconds.

Note - If the pairing is not successful, switch o headphones by pushing the center button for 3 seconds, and then re-pair according to the steps outlined above. - After pairing is successful, paired devices will remember each other. Unless pairing informationis deleted, so there is no need to pair again. - The headphones will connect with the latest paired device. If you want to pair with other Bluetooth devices, switch o the Bluetooth function of the current Bluetooth device, and then pair and connect it with the new Bluetooth device according to steps outlined above.

Pairing in detail

EN 10

Pairing with a Bluetooth Adapter (iSport oruSport)

Note Freedom does not support apt-X CD quality audio even though it’s o ered on iSport or uSport.

EN 11

Pairing with adapter

1. Keep the Bluetooth adapter and headphones within 1 meter of each other when pairing. 2. Put the headphones into pair mode as outlined above. 3. Plug the Bluetooth adapter into the iPhone or iPod and play a song. 4. The headphones and adapter will pair...