Pc chips manufacturing ltd m717
Páginas: 3 (544 palabras)
Publicado: 19 de agosto de 2012
PC CHIPS MANUFACTURING LTD.
M717
Device Type | Mainboard |
Processor | Pentium II |
Processor Speed | 233/266/300/333MHz |
Chip Set | Unidentified |
Audio Chip Set | Unidentified |Maximum Onboard Memory | 256MB (EDO & SDRAM supported) |
Cache | 256/512KB (located on the Pentium II CPU) |
BIOS | AMI |
Dimensions | 220mm x 220mm |
I/O Options | 32-bit PCI slots (3), floppydrive interface, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), VGA port, ATX power connector, audio in – CD-ROMs (2), PS/2 mouse port |
CONNECTIONS |
Purpose |Location | Purpose | Location |
ATX power connector | ATX | ATX form card connector | J3 |
Audio in – CD-ROM | CD1 | Wake on LAN connector | J4 |
Audio in – CD-ROM | CD2 | Speaker | J6/pins 1, 3, 5,7 |
Serial port 1 | COM1 | Power LED & keylock | J6/pins 2, 4, 6, 8, 10 |
Serial port 2 | COM2 | IDE interface LED | J6/pins 15 & 16 |
CPU fan power | FAN1 | Reset switch | J6/pins 17& 18 |
Floppy drive interface | FDC1 | Soft off power switch | J6/pins 19 & 20 |
Digital audio out | J1A | 32-bit PCI slots | PC1 - PC3 |
Digital audio in | J1B | Parallel port | PRN1 |IDE interface 1 | IDE1 | PS/2 mouse port | PS1 |
IDE interface 2 | IDE2 | PS/2 mouse interface | PS2 |
Sound/game header | J2 | VGA connector | VGA1 |
USER CONFIGURABLE SETTINGS |
Function| Label | Position |
» | Microphone type selection standard | JP2 | Open |
| Microphone type selection special | JP2 | Closed |
» | CMOS memory normal operation | JP3 | Pins 1 & 2 closed | | CMOS memory clear | JP3 | Pins 2 & 3 closed |
SIMM CONFIGURATION |
Size | Bank 0 |
8MB | (2) 1M x 36 |
16MB | (2) 2M x 36 |
32MB | (2) 4M x 36 |
64MB | (2) 8M x 36 |
128MB |(2) 16M x 36 |
Note: Bank 0 and Bank 1 can not be used at the same time. Speeds of all SIMM modules must be faster than 70ns. |
DIMM CONFIGURATION |
Size | Bank 0 | Bank 1 |
8MB | (1) 1M...
M717
Device Type | Mainboard |
Processor | Pentium II |
Processor Speed | 233/266/300/333MHz |
Chip Set | Unidentified |
Audio Chip Set | Unidentified |Maximum Onboard Memory | 256MB (EDO & SDRAM supported) |
Cache | 256/512KB (located on the Pentium II CPU) |
BIOS | AMI |
Dimensions | 220mm x 220mm |
I/O Options | 32-bit PCI slots (3), floppydrive interface, IDE interfaces (2), parallel port, PS/2 mouse interface, serial ports (2), VGA port, ATX power connector, audio in – CD-ROMs (2), PS/2 mouse port |
CONNECTIONS |
Purpose |Location | Purpose | Location |
ATX power connector | ATX | ATX form card connector | J3 |
Audio in – CD-ROM | CD1 | Wake on LAN connector | J4 |
Audio in – CD-ROM | CD2 | Speaker | J6/pins 1, 3, 5,7 |
Serial port 1 | COM1 | Power LED & keylock | J6/pins 2, 4, 6, 8, 10 |
Serial port 2 | COM2 | IDE interface LED | J6/pins 15 & 16 |
CPU fan power | FAN1 | Reset switch | J6/pins 17& 18 |
Floppy drive interface | FDC1 | Soft off power switch | J6/pins 19 & 20 |
Digital audio out | J1A | 32-bit PCI slots | PC1 - PC3 |
Digital audio in | J1B | Parallel port | PRN1 |IDE interface 1 | IDE1 | PS/2 mouse port | PS1 |
IDE interface 2 | IDE2 | PS/2 mouse interface | PS2 |
Sound/game header | J2 | VGA connector | VGA1 |
USER CONFIGURABLE SETTINGS |
Function| Label | Position |
» | Microphone type selection standard | JP2 | Open |
| Microphone type selection special | JP2 | Closed |
» | CMOS memory normal operation | JP3 | Pins 1 & 2 closed | | CMOS memory clear | JP3 | Pins 2 & 3 closed |
SIMM CONFIGURATION |
Size | Bank 0 |
8MB | (2) 1M x 36 |
16MB | (2) 2M x 36 |
32MB | (2) 4M x 36 |
64MB | (2) 8M x 36 |
128MB |(2) 16M x 36 |
Note: Bank 0 and Bank 1 can not be used at the same time. Speeds of all SIMM modules must be faster than 70ns. |
DIMM CONFIGURATION |
Size | Bank 0 | Bank 1 |
8MB | (1) 1M...
Leer documento completo
Regístrate para leer el documento completo.