Redes 4 chap pap
RouterE>enable
Password:
RouterE#cifn t
RouterE#cifn t
^
% Invalid input detected at '^' marker.
RouterE#conf t
RouterE#conf terminal
Enter configurationcommands, one per line. End with CNTL/Z.
RouterE(config)#int s0/1
RouterE(config-if)#no sh
RouterE(config-if)#no shutdown
%LINK-5-CHANGED: Interface Serial0/1, changed state to upRouterE(config-if)#enc
RouterE(config-if)#encapsulation fr
RouterE(config-if)#encapsulation frame-relay
RouterE(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1, changed state to upint
RouterE(config-if)#int s0/1.405 po
RouterE(config-if)#int s0/1.405 point-to-point
RouterE(config-subif)#
%LINK-5-CHANGED: Interface Serial0/1.405, changed state to up
%LINEPROTO-5-UPDOWN:Line protocol on Interface Serial0/1.405, changed state to up
RouterE(config-subif)#int s0/1.406 point-to-point
%LINK-5-CHANGED: Interface Serial0/1.406, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1.406, changed state to up
RouterE(config-subif)#int s0/1.407 point-to-point
%LINK-5-CHANGED: Interface Serial0/1.407, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1.407, changed state to up
RouterE(config-subif)#int s0/1.405 point-to-point
RouterE(config-subif)#ip add
RouterE(config-subif)#ip address 10.20.30.1255.255.255.252
RouterE(config-subif)#fr
RouterE(config-subif)#frame-relay in
RouterE(config-subif)#frame-relay interface-dlci 405
RouterE(config-subif)#int s0/1.406 point-to-pointRouterE(config-subif)#ip ad
RouterE(config-subif)#ip address 10.20.30.5 255.255.255.252
RouterE(config-subif)#fr
RouterE(config-subif)#frame-relay in
RouterE(config-subif)#frame-relay interface-dlci 406RouterE(config-subif)#int s0/1.407 point-to-point
RouterE(config-subif)#ip add
RouterE(config-subif)#ip address 10.20.30.9 255.255.255.252
RouterE(config-subif)#fr
RouterE(config-subif)#frame-relay in...
Regístrate para leer el documento completo.