Redes Inalambricas

Release Notes for Cisco Aironet 1310 Outdoor Access Point/Bridge for Cisco IOS Release 12.2(15)JA
April 29, 2004 These release notes describe open caveats for Cisco IOS Release 12.2(15)JA. They also provide important information about the Cisco Aironet 1310 Outdoor Access Point/Bridge (hereafter called the 1310 access point/bridge).

Contents
These release notes contain the followingsections.
• • • • • • • • • •

Introduction, page 2 System Requirements, page 2 New Features, page 3 Installation Notes, page 4 Important Notes, page 7 Caveats, page 12 Troubleshooting, page 13 Documentation Updates, page 13 Related Documentation, page 13 Obtaining Documentation, page 14

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA

Copyright ©2004 Cisco Systems, Inc. All rights reserved.

Introduction

Introduction
The Cisco Aironet 1310 Outdoor Access Point/Bridge is an 802.11b/g device that provides high speed and cost-effective wireless connectivity between multiple fixed or mobile networks and clients. The flexibility of the device allows it to operate as a wireless bridge, access point, or workgroup bridge. Building ametropolitan area wireless infrastructure with the 1310 access point/bridge provides deployment personnel with a flexible, easy to use solution that meets the security requirements of wide area networking professionals. The 1310 access point/bridge supports the 802.11b/g standard, providing 54-Mbps data rates with a proven, secure technology. Cisco makes the maintenance and installation of the accesspoint/bridge easy by integrating it with your wired network using the Cisco SWAN solution. Based on the Cisco IOS operating system, the 1310 access point/bridge includes advanced features such as Fast Secure Layer 2 Roaming, QoS, and VLANs.

System Requirements
Cisco IOS Release 12.2(15)JA is factory installed on your 1310 access point/bridge. As new Cisco IOS releases become available for theaccess point/bridge, you should consider upgrading.

Determining the Software Version
To determine the version of IOS running on your 1310 access point/bridge, use a Telnet session to log into the access point/bridge and enter the show version EXEC command. This example shows command output from a 1310 access point/bridge configured as a bridge running Cisco IOS Release 12.2(15)JA:
bridge> showversion Cisco Internetwork Operating System Software IOS (tm) C1310 Software (C1310-K9W7-M), Version 12.2(15)JA Copyright (c) 1986-2004 by Cisco Systems, Inc.

You can also find the software version on the System Software Version page in the device’s web-browser interface.

Upgrading to a New Software Release
For instructions on installing 1300 series software:
1.

Follow this link to theCisco Aironet documentation home page: http://www.cisco.com/univercd/cc/td/doc/product/wireless/index.htm Follow this path to the product, document, and chapter: Aironet 1300 Series Wireless LAN Products > Cisco Aironet 1300 Series Bridge Software Configuration Guide > Managing Firmware and Configurations > Working with Software Images

2.

Click this link to browse to the Cisco IOS SoftwareCenter on Cisco.com: http://www.cisco.com/public/sw-center/sw-ios.shtml

3.

On the Web page, log in to access the Feature Navigator or the Cisco IOS Upgrade Planner, or click Wireless Software to go to the Wireless LAN Software page.

Release Notes for Cisco Aironet 1310 Outdoor Access Point/Bridge for Cisco IOS Release 12.2(15)JA

2

OL-4777-01

New Features

New Features
Thissection lists new features in Cisco IOS Release 12.2(15)JA for the 1310 access point/bridge. The Cisco Aironet 1310 Outdoor Access Point/Bridge supports the same Cisco IOS Software access point features as Cisco Aironet 1100 Series Access Points in Cisco IOS Software Release 12.2(13)JA and earlier Cisco IOS Software releases with the exception of radio management aggregation, Wireless Domain Services...