Reglamento Interno De Trabajo

CLEANING MATERIALS

* BAKING SODA
* TOOTH BRUSH
* MIDAS SILVER TARNISH OFF ( SOLD BY WWW.RIOGRANDE.COM)
* 3M TARNI SHIELD( SOLD BY  WWW.RIOGRANDE.COM
* PAINTBRUSH
* PLENTYFRESH WATER
* BOWL
* HAIR DRYER
* SOFT CLOTH
* TARNI SHIELD 3M STRIPS (SOLD BY WWW.RIOGRANDE.COM OR SILVER ANTI-TARNISH BLOCKS.
* KLEENEX KITCHEN TOWELS
* FABULOSO(MR.CLEAN)-COLGATE-PALMOLIVE FLOOR CLEANER (lavender)
* RUBBER GLOVES

INSTRUCTIONS:

*ALL SILVER COMPONENTS and SILVER-COPPER PIECES

1. Fill your bowl with FRESH WATER.
2. Wear your GLOVES and openyour MIDAS TARNISH OFF, dip your PAINT BRUSH into the solution and apply gently on the piece(s) you wish to clean, on SILVER-COPPER pieces avoid touching copper areas, since this chemical could aftertime could ruin copper patinas, repeat this process until you see all the tarnish is gone.
3. After applying the MIDAS TARNISH OFF, please deposit your piece(s) into the BOWL with fresh water.
4. Takeyour pieces out of the BOWL rinse again with FRESH WATER making sure all your pieces are free of any waste of the MIDAS TARNISH OFF.
5. Pour 2 Oz of FABULOSO on small container, and scrub carefullyyour pieces adding to this process some baking soda to your pieces.
6.  Rinse well your pieces at least 2 times with FRESH WATER, making sure the piece is free of any waste of BAKING SODA orFABULOSO.
7. Pre-Dry your pieces with the KLEENEX TOWELS and then proceed to dry well with HAIR DRYER (make sure your piece completely dry to avoid water marks, especially with pieces are hollow, semi hollowor with intricate work.
8. Apply some TARNI SHIELD on your cloth, and ONLY(VERY IMPORTANT) apply against polish surfaces(shiny) avoiding the matt finish ones, rub this polish areas an look howsilver becomes shiny.
9. Pieces already clean are ready to display, we recommend to display our pieces on enclosed areas, adding to your displays TARNISH SHIELD STRIPS, these strips will provide at...