Solid

Solo disponible en BuenasTareas
  • Páginas : 148 (36988 palabras )
  • Descarga(s) : 0
  • Publicado : 27 de noviembre de 2011
Leer documento completo
Vista previa del texto
Power • Accuracy • Functionality

V E R S I O N

6.0

T u t o r i a l s



1999 Structural Research and Analysis Corporation (SRAC) 12121 Wilshire Blvd., Suite 700 Los Angeles, California 90025-1170 310 207-2800 (phone) 310 207-2774 (fax)

COSMOS/M, COSMOS/Works, and GEOSTAR are trademarks of Structural Research and Analysis Corporation. ANSYS is a trademark of SAS IP. MSC andMSC/are registered trademarks of MacNeal-Schwendler Corporation. NASTRAN is a registered trademark of the National Aeronautics and Space Administration. Acrobat, and Acrobat Reader are trademarks of Adobe Systems Incorporated. IGES Access Library is a trademark of IGES Data Analysis, Inc. Other brand or product names are trademarks or registered trademarks of their respective holders. Portions of thissoftware® 1999 Unigraphics SolutionsTM, Inc. Portions of this software® 1999 Visual Kinematics, Inc. Portions of this software® 1999 Solversoft, Inc.

Information is subject to change without notice. No material may be reproduced or transmitted in any form or by any means for any purpose without written permission of SRAC. As a condition to your use of this software, you agree to accept thelimited warranty, disclaimer and other terms and conditions set forth in SRAC License Agreement which accompanies this software. If, after reading the SRAC License Agreement, you do not agree with its terms and conditions, promptly return the unused software and all accompanying material to SRAC and your payment will be refunded.

1
Introduction

This manual provides you with step-by-steptutorials to use COSMOS/Works. These tutorials assume that you are familiar with SolidWorks. The tutorials are grouped as follows

q q q q q q q

Static Analysis Tutorial Contact Stress Analysis Tutorial Importing Motion Loads Frequency Analysis Tutorial Buckling Analysis Tutorial Thermal Analysis Tutorial Optimization Analysis Tutorial

Although you can begin with the tutorials, we recommend thatyou read the COSMOS/Works Fundamentals, COSMOS/Works Interface, and Analysis Background chapters of the COSMOS/Works User’s Guide to familiarize yourself with some of the fundamentals, including:

q q q

Design Study Concepts The COSMOS/Works Manager, and COSMOS/Works Analysis Capabilities

Learning to Use COSMOS/Works

1-1

✍ Structural Research and Analysis Corporation continuouslyupdates the COSMOS/Works program to improve accuracy and performance. Please note that when you try the tutorials in this manual, you may obtain slightly different results depending on the version of SolidWorks and COSMOS/ Works installed on your computer.

1-2

COSMOS/Works Tutorial

2
Static Analysis Tutorial

This chapter presents step-by-step lessons for performing linear staticanalysis.

q q q q q q q q

Lesson 1: Analysis of a Bracket Part Lesson 2: Analysis of a Crank Assembly Lesson 3: Analysis of a Thin Bracket (Shell Model) Lesson 4: Analysis of an I-beam (Shell Model) Lesson 5: Analysis of a Funnel (Shell Model) Lesson 6: Analysis of a Fuel Storage Tank (Shell Model) Lesson 7: Analysis of a Pulley Under a Bearing Force Lesson 8: Stress Concentration Around a Holein a Plate

Learning to Use COSMOS/Works

2-1

Chapter 2 Static Analysis Tutorial

n Lesson 1: Analysis of a Bracket Part

Lesson 1: Analysis of a Bracket Part
In this lesson, you will learn how to:

q q q q q q q

Retrieve a part and create a static analysis study, Assign material to the part, Insert restraints and pressure loading, Mesh the part, Run static analysis, UseCOSMOS/Works menu system and new toolbars to perform analysis steps, and Visualize the static analysis results.

Retrieve the Part
To retrieve the part:
1 2

Start COSMOS/Works. Click File, Open. The Open dialog box opens. Change the Look in folder to ...\Examples where “...” refers to the COSMOS/Works installation directory. From the Files of type drop-down list, select Part Files (*.prt;...
tracking img