Terrazo

Terrazzo workers create walkways, floors, patios, and panels by exposing marble chips and other fine aggregates on the surface of finished concrete or epoxy-resin. Much of the preliminary work ofterrazzo workers is similar to that of cement masons. Marble-chip, cementitious terrazzo requires three layers of materials. First, cement masons or terrazzo workers build a solid, level concretefoundation that is 3 to 4 inches deep. After the forms are removed from the foundation, workers add a 1-inch layer of sandy concrete. Before this layer sets, terrazzo workers partially embed metal dividerstrips in the concrete wherever there is to be a joint or change of color in the terrazzo. For the final layer, terrazzo workers blend and place into each of the panels a fine marble chip mixture thatmay be color-pigmented. While the mixture is still wet, workers toss additional marble chips of various colors into each panel and roll a lightweight roller over the entire surface.

In the 1970s,polymer-based terrazzo was introduced and is called thin-set terrazzo. Initially polyester and vinyl ester resins were used as the binder resin. Today, most of the terrazzo installed is epoxy terrazzo.The advantages of this material over cementitious terrazzo include wider selection of colors, 1/4 inch to 3/8 inch installation thickness, lighter weight, faster installation, impermeable finish,higher strength, and less susceptibility to cracking. The disadvantage of epoxy resin based terrazzo is that it can only be used internally not externally. Epoxy based terrazzo will lose its color andslightly peel when used externally, whereas cement based terrazzo will not. In addition to marble aggregate blends, other aggregates have been used such as mother of pearl and abalone shell. Recycledaggregates include: glass, porcelain, concrete and metal. Shapes and medallions can be fabricated on site by bending divider strips or off site by water-jet cutting.

When the terrazzo is thoroughly...