5 Fuerzas Porter Industria Salmonera

Special Note:
The BIOS and DEVICE DRIVERS contained here are exclusively for Micro-Star products only. Micro-Star assumes no responsibility for any damages resulting from improper use or lack of technical expertise.

WARNING!!!!!
DON'T FLASH FROM A FLOPPY DISK!!!!
DON'T FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!!
DON'T FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING!!!!

Award BIOS FlashProcedure
1. Know your model number
a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (Some motherboards are named like K8N Diamond; make sure you have the right version number)
b. Boot up your system & take a look at the top left screen during POST, you should see something like “W7100NMS V1.1021705” This means the board is MS-7100 with BIOS version 1.1
Hint: Many systems are clearing this message very fast, the bios version is then unreadable, and you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup.


2. Download the BIOS that matches your motherboard AND version number (some motherboards are named like K8N Diamond; make sure you have the right version number).BIOS can be found according to the CPU type of your board like if your CPU is AMD 939 type then look here
http://global.msi.com.tw/index.php?func=prodpage2&maincat_no=1&cat2_no=171

3. Extract the BIOS-archive that you have downloaded by double clicking to c:\test

4. Boot your system from a Win98 or WinME boot-floppy.
How to make boot floppy in case your don’t have it ready:
For Win9X, Youcan type [C:\ format a:/s] from the DOS prompt.
For WinME, You can make a boot floppy from control panel--> add/remove program-->make boot floppy. Remove autoexec.bat & config.sys file if there's any.
For Win2000, there's no way to make boot floppy, so you have to either use Win9X or WinME boot floppy.
For WinXP, you can make a DOS boot disk. Go to Your Computer, right click drive A:, selectFormat, select copy system files. 

5. When you get the A:\ prompt, type the following sequence:
C:
cd\test
C:\test> awdfl865 BIOS file
(To save or not to save old BIOS is the user’s decision)

6. Reboot your system when prompted


AMI BIOS Flash Procedure

1. Know your model number
a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, alsocheck the version number that is written there as well. (some motherboards are named like P45 Diamond, make sure you have the right version number)
b. Boot up your system & take a look at the top left screen during POST, you should see something like “A7516IMS V1.4 082708” This means the board is MS-7516 with BIOS version 1.4
Hint: Many systems are clearing this message very fast, the bios versionis then unreadable, and you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup.


2. Download the BIOS that matches your motherboard AND version number (some motherboards are named like P45 Diamond, make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is Intel 775 type then look herehttp://global.msi.com.tw/index.php?func=prodpage2&maincat_no=1&cat2_no=170

3. Extract the BIOS-archive that you have downloaded by double clicking to c:\test

4. Boot your system from a Win98 or WinME boot-floppy.
How to make boot floppy in case your don’t have it ready:
For Win9X, You can type [C:\ format a:/s] from the DOS prompt.
For WinME, You can make a boot floppy from control panel--> add/removeprogram-->make boot floppy. Remove autoexec.bat & config.sys file if there's any.
For Win2000, there's no way to make boot floppy, so you have to either use Win9X or WinME boot floppy.
For WinXP, you can make a DOS boot disk. Go to Your Computer, right click drive A:, select Format, select copy system files. 

5. When you get the A:\ prompt, type the following sequence:
C:
cd\test
C:\test>...