Adjetives ingles

Comparative adjectives

-Reliable growth testing can take place at the system, major subsystem or lower unit.

La prueba del crecimiento fiable puede ocurrir en el sistema, subsistema o en la unidad mas baja.

-Later, the system and subsystem prototypes may be subjected to dedicated reliability growth testing, integrated reliability growth testing or both.

Mas tarde, los prototipos deel sistema y subsistema puede ser sometido a las pruebas dedicadas al crecimiento de fiabilidad, la prueba de crecimiento de fiabilidad integrado o ambos.

-With lower level testing, the primary focus is to improve the reliability of a unit of the system, such an Engine, water pump, etc.

Con la prueba del nivel mas bajo, el enfoque primario es el de mejorar la fiabilidad de una unidad de elsistema, tales como un motor, una bomba de agua, etc.

-Natural learning is a continuos proccess that improves reliability as fewer mistakes are made in operation and maintenance, since the equipment in being used more effectively.

El aprendizaje natural es un proceso continuo que mejora la fiabilidad como hacer menos errores durante la operación y mantenimiento, como el equipo manejar elequipo mas efectivamente.

Superlative adjective

• Most development programs have considerable testing that takes place for reasons other than reliability.

La mayoría de los programas de desarrollo tienen considerables pruebas que ocurren por razones más que la fiabilidad.

Positive adjectives

-Modern applications of reliability growth extend these methods to early design and toin-service customer use.

Las aplicaciones modernas de un crecimiento de fiabilidad extienden estos métodos a un diseño Viejo y al uso de un servicio personal para el cliente.

-For example, a problem such as a seal leak may have more than one cause.

Por ejemplo, un problema tal como una gota puede tener más que una causa.

-Different Management strategies may attain different reliabilityvalues with the same Basic design.

Diferentes estrategias de administración pueden lograr diferentes valores de fiabilidad con el mismo diseño básico.

- A corrective action takes place at the problem and root cause level.

Una acción correctiva sucede en el nivel de la raíz de problema y causa.

-In a general, the first prototypes produced Turing the development of a new complexsystem will contain design manufacturing and/or engineering deficiencies.

En general, el primer prototipo producido durante el desarrollo de un sistema Nuevo complejo contendrá deficiencias de diseño, fabricación y/o ingeniería.

In general, the first prototypes produced during the development of a new complex system will contain design manufacturing and/or engineering deficiencies. Because ofthese deficiencies the initial reliability of the prototypes may be below the system reliability goal or requirement. In order to identify and correct these deficiencies the prototypes are often subjected a rigorous testing program. During testing, problem areas are identified and appropriate corrective actions (or redesign) are taken. Reliability growth is improvement in the reliability of aproduct (component, subsystem or system) over a period of time due to changes in products design and/or the manufacturing process. A reliability growth program is a well-structured process of finding reliability problems by testing incorporating corrective actions and monitoring the increase of the products reliability throughout the test phases the term growth is use since you assume that reliabilityof the product will increase over time as design changes and fixed are implemented. However, in practice no growth or negative growth may occur.

Reliability goals are generally associated with a reliability growth program. A program may have more than one reliability goal. For example, there may be a reliability goal associated with failures resulting in unscheduled maintenance actions and...