Administ

What will TempTABs do for my business?
TempTABs are an easy, cost effective method to monitor process
temperatures and temperature uniformity in furnaces without the
use of wires, electronics orthermocouples.
How do they work?
TempTABs are made from materials that exhibit controlled shrinkage
over time. They measure the effect of temperature and the effect of
time at temperature.
WhichTempTAB is right for me?
TempTABs are currently available in 5 different temperature ranges
TempTAB 300 850-1,100C (1,562-2,012F)
TempTAB 400 1,000-1,200C (1,832-2,192F)
TempTAB 600 1,100-1,300C(2,012-2,372F)
TempTAB 650 1,200-1,500C (2,192-2,732F)
TempTAB 700 1,450-1,700C (2,642-3,092F)
Will TempTABs contaminate the load in my furnace?
No. As part of the manufacturing process, TempTABsare pretreated
to remove any organic or other volatile by-products.
Where should I place my TempTABs?
TempTABs can be placed anywhere within the load, preferably in
the same locations as wheretemperature uniformity is being verified
Regular use will allow you to verify your process and allow you to
see trends that may develop over time.
Why do TempTABs have a hole in the middle?
TempTABsare designed to be used in a variety of conditions. In
applications where they need to be suspended in the firing chamber
or where they are exposed to high velocity air movement, it is
recommendedthat the TempTABs be secured in position with a wire
threaded through the center hole.
Can I check the uniformity of my furnace without wires,
bulky thermal protection packages or electronics?
Yes.TempTABs allow you to easily verify the temperature uniformity
inside your furnace as often as you like.
My process runs in an Atmosphere that contains Nitrogen
and/or Hydrogen. Will TemTABs workfor me?
Yes. TempTABs will work in either air, inert or reducing atmospheres.
My Process is done in a vacuum. Will they work for me?
Yes. They are designed to survive typical vacuum furnaces....