Alarm
Preparation
4RUNNER
2006 -
TVIP V5 (RS3200 PLUS)
Part Number: 08586-3D871
Kit Contents
Item # 1 2 3 4 5 6 Quantity Reqd. 1 1 1 1 1 1 Description Wire Harness V5 Security ECU ECU Mounting Bracket GBS ECU GBS ECU Mounting Bracket Microphone
NOTE: Part number of this accessory may not be the same as the part number shown.
Torque Wrench Pliers Pliers Pneumatic/ElectricWrench 4.1 N·m (36 lbf·in) Slip-joint Needle Nose
Special Chemicals
Cleaner Glass Cleaner
Notes
3MTM Prep Solvent-70 Household Windex
Hardware Bag Contents
Item # 1 2 3 4 5 6 7 8 9 10 11 12 Quantity Reqd. 15 5 2 2 2 1 1 1 1 2 1 1 Description Medium Wire Ties Large Wire Ties Small Foam Tape Strip Large Foam Tape Strip Splicing Connector Bolt Nut Butyl Tape Key Tag Warning LabelOwner’s Guide Warranty Card
General Applicability
Note: 4Runner with factory keyless entry, only.
Recommended Sequence of Application
Item # 1 2 Accessory V5 Audio *Mandatory
Vehicle Service Parts (may be required for reassembly)
Item # Quantity Reqd. Description
Legend
STOP: Damage to the vehicle may occur. Do not proceed until process has been complied with. OPERATOR SAFETY: Use cautionto avoid risk of injury. CAUTION: A process that must be carefully observed in order to reduce the risk of damage to the accessory/vehicle and to ensure a quality installation. TOOLS & EQUIPMENT: Used in Figures calls out the specific tools and equipment recommended for this process. REVISION MARK: This mark highlights a change in installation with respect to previous issue.
Additional ItemsRequired For Installation
Item # Quantity Reqd. Description
Conflicts
Note: Must not be installed in vehicles with factory TDS.
Recommended Tools Personal & Vehicle Protection
Safety Glasses Safety Gloves Vehicle Protection
Notes
(Optional) Blankets, Part Boxes
Special Tools
Striker Tool
Notes
CAD-E IADE P/N ALL 02-016-01
Installation Tools
Phillips Head Screwdriver FlatBlade Screwdriver Socket Socket Extension Nylon Panel Removal Tool Wrench Side Cutters Issue: B 04/22/05
Notes
#2, screwdriver or tip Small, Flat Blade 10mm 3" e.g. Panel Pry Tool #1
Toyota SST # 00002-06001-01
10mm
Page 1 of 17 pages
TOYOTA
Procedure
4RUNNER
2006 -
TVIP V5 (RS3200PLUS)
Care must be taken when installing this accessory to ensure damage does not occur tothe vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the "Accessory Installation Practices" document. This document covers such items as:Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). Safety (eye protection, rechecking torque procedure, etc.). Vehicle Disassembly/Reassembly(panel removal, part storage, etc.). Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). Please see your Toyota dealer for a copy of this document.
1. Vehicle Disassembly.
10mm Wrench Negative Battery Cable
(a) Remove the negative battery cable. (Fig. 1-1) (1) Protect the fender before starting. (2) For automatic equipped vehicles, place the shifterin low gear and set the parking brake prior to disconnecting the battery. (3) Do not touch the positive terminal with any tool when removing cable. (b) Remove the passenger side step cover. (Fig. 1-2) (1) Cover the floor and seats before starting. (c) Remove the passenger side cowl cover. (Fig. 1-3) (1) Remove the nut securing the cover.
Step Cover
Fig. 1-1
Nylon Panel Removal Tool
Fig.1-2
Nylon Panel Removal Tool
Nut
Fig. 1-3
Cowl Cover
Issue: B
04/22/05
Page 2 of 17 pages
TOYOTA
Procedure
4RUNNER
2006 -
TVIP V5 (RS3200PLUS)
(d) Remove the glove box assembly. (Fig. 1-4) (1) Remove the screw securing the glove box assembly.
Damper
(2) Remove the glove box damper. (e) Remove the cover from the upper glove box area. (Fig. 1-5) (1)...
Regístrate para leer el documento completo.