Alcatel-Lucent
2011
COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
Solución
VPN
1521CLIP
Carrier Ethernet
1531CLAS GE
IDE
Características de la solución • Máximo 4 pares de cobre por equipo 1521CLIP • Máximo 40 pares de cobre por equipo 1531CLAS • 1 puerto de cliente FE por equipo 1521CLIP • 1 puerto de uplink GbE óptico por equipo 1531CLAS • Servicio IDE(p2p) • Servicio VPN (p2p)
2 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
Conectividad Física
CE 1521CLIP 1531CLAS
Carrier Ethernet
ETHERNET FAST ETHERNET 10/100 BASTE T RJ-45, UTP CAT 5 FULL DUPLEX FULL RATE COBRE (1, 2, 3, 4 pares) G.SHDSL G.991..2 INTERFAZ ÓPTICA GbEth 1310 nm o 850 nm 1+0
Distancia vs Velocidad
Vel. 1 par Distancia max (Best Case) Distancia max (WosrtCase) 3 km 2.4 km 2 Mbps 2 pares 4 km 3.3 km 1 par 2 km 1.4 km 4 Mbps 2 pares 3 km 2.4 km 3 pares 3.6 km 2.9 km 4 pares 4 km 3.3 km 2 pares 2.5 km 1.9 km 6 Mbps 3 pares 3 km 2.4 km 4 pares 3.4 km 2.7 km 2 pares 2 km 1.4 km 8 Mbps 3 pares 2.6 km 2 km 4 pares 3 km 2.4 km
3 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
1531 CLAS, Copper Line Access Switch
Full-front Access
•Características Generales:
-Conmutación ethernet, agregación y servicios -Múltiples servicios por puertos y múltiples SLAs por servicio -Soporte de QoS/CoS
•Interfaces:
Lado cliente - 40 pares de cobre para 2BASE-TL por unidad Interfaz de red modular - 2 x 1000BASE-X SFP
• Caracaterísticas físicas:
1 RU (44) x 444 x 251mm Alimentación doble DC
4 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTSRESERVED.
1531 CLAS Interfaces
Puertos Uplink GbE Puerto de consola Puerto de gestión
Puertos de pruebas MLT Alimentación
Interfaces de stacking
Ventilador
Alarmas I/O Pares 1-16 2BASE-TL Pares 17-40 2BASE-TL
40 pares de cobre 2BASE-TL
5 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
1521CLIP, Copper Line IP Switch
Alimentación
10/100Base-TX InterfazEthernet
1 a 4 pares 2Base-TL Puerto de consola
1 a 4 pares 2Base-TL
Dos puertos RJ-45 (cada uno de hasta cuatro pares de cobre) Velocidad de cada par de cobre de hasta 5.7 Mbps No soporta servicios E1/T1 Redundancia en alimentación
6 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
Partes del 1521CLIP / 1531 CLAS
1531 CLAS 40-copper pair E.SHDSL, TDR
1531 CLAS GBX, uplinkmodule Optical SFP, 1000Mbps Ethernet, 1000BASE-SX (850NM) or 1000BASE-LX (1310nm)
1521 CLIP 8P CP,E.SHDSL
12V adapter for 1521 CLIP/1522 CLIP CPE US CP
1521 CLIP wall mounting brackets
ALCATEL 1531 CLIP SHDSL CABLE, 25PR, RJ21/RJ21, 30,4M (100 FT) 1521 CLIP/1522 CLIP Shelf 19/23" for 2 units
7 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
Partes del 1521CLIP / 1531 CLASCódigo 3AG21600BAAA 3AG21622AAAA 3AG 21232AAAA 3AG21220USAB 3AG21642JAAA 3AG21630AAAA 3AG 21631AAAA 3AG21226BA 3AG21190BA
Descripción 1531 CLAS 40-copper pair E.SHDSL, TDR 1531 CLAS GBX, uplink module 1521 CLIP 8P CP,E.SHDSL 12V adapter for 1521 CLIP/1522 CLIP CPE US CP ALCATEL 1531 CLIP SHDSL CABLE, 25PR, RJ21/RJ21, 30,4M (100 FT) Optical SFP, 1000Mbps Ethernet, 1000BASE-SX, 850nm. Approximaterange = 500m. Optical SFP, 1000Mbps Ethernet, 1000BASE-LX, 1310nm. Approximate range = 10km. 1521 CLIP wall mounting brackets 1521 CLIP/1522 CLIP Shelf 19/23" for 2 units
8 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
1531 CLAS Installation
Herramientas requeridas:
• • • • • • #2 Phillips screwdriver #3 Phillips screwdriver 2.4 mm flat blade screwdriver cable-tie cutters 3/8thinch hex nut driver or ratchet/socket combination crimper for #10-14 AWG lug
Requerimientos: • -48 VDC power (distribution panel)
• • • • • • •
9 COPYRIGHT © 2011 ALCATEL-LUCENT. ALL RIGHTS RESERVED.
(min/max range: -40/-57.6 VDC) 3 AMP fuses (2) for –48 VDC power distribution panel 14-18 AWG wire for power 10-14 AWG wire for grounding RJ-21 male 50-pin cables (2) Ethernet cable for...
Regístrate para leer el documento completo.