Alex
Páginas: 20 (4947 palabras)
Publicado: 8 de mayo de 2012
SPERRY DRILLING
LWD and Drilling Technology Suite
LWD Technology Suite
Common LWD Specifications
Nominal OD Nominal ID Connections Make-up torque Max. dogleg severity Rotating Sliding Max. mass flow rate Max. sand content Max. LCM * Max. RPM Max. WOB Vibration Power Supply 3.125 in. (79 mm) 0.8 in. (20 mm) 2.75 in. 8 STUB ACME 2,000 ft-lbf (2.7 kNm) 14°/100 ft (30m) 30°/100 ft (30m) 1,800lbm/min. (816 kg/min.) 2% Pulser dependent 60 15,000 lbs (6.8 T) Lithium battery or downhole generator Design Performance (Build/Drop/Turn) Max. Dogleg Severity 8.00 in. *, **, ‡ (203 mm) 9.50 in. ‡ (241 mm) Rotating 14°/100 ft (30 m) Sliding 25°/100 ft (30 m) Max. Shaft Rotary Torque RPM Range 4.5 ft (1.37 m) 4.4 ft (1.34 m) Max. WOB Vibration, Max. Mass Flow Rate, Max. Sand Content, Max. LCMLimit 8,000 ft-lbf (10.8 kNm) 60 – 180 25,000 lbs 10°/100 ft (30 m) 21°/100 ft (30 m) 20,000 ft-lbf (27.1 kNm) 60 – 250 55,000 lbs 8°/100 ft (30 m) 14°/100 ft (30 m) 30,000 ft-lbf (40.7 kNm) 60 – 250 100,000 lbs 4.75 in. (121 mm) 1.25 in. (32 mm) 3.50 in. IF 10,000 ft-lbf (13.6 kNm) 14°/100 ft (30m) 30°/100 ft (30m) 3,750 lbm/min. (1,700 kg/min.) 2% Pulser dependent 180 25,000 lbs (11.3 T) 6.75 in.(171 mm) 1.92 in. (49 mm) 4.50 in. IF 30,000 ft-lbf (40.7 kNm) 10°/100 ft (30m) 21°/100 ft (30m) 10,000 lbm/min. (4,535 kg/min.) 2% Pulser dependent 180 45,000 lbs (20.6 T) 1.92 in. (49 mm) 6.625 in. REG 56,000 ft-lbf (75.9 kNm) 8°/100 ft (30m) 14°/100 ft (30m) 10,000 lbm/min. (4,535 kg/min.) 2% Pulser dependent 180 60,000 lbs (27.0 T) 8.00 in. (203 mm) 2.38 in. (60 mm) 6.625 in. REG 46,000 ft-lbf(62.4 kNm) 8°/100 ft (30m) 14°/100 ft (30m) 20,000 lbm/min. (9,070 kg/min.) 2% Pulser dependent 180 60,000 lbs (27.0 T) 9.50 in. (241 mm) 2.38 in. (60 mm) 7.625 in. REG 88,000 ft-lbf (119.3 kNm) 8°/100 ft (30m) 14°/100 ft (30m) 20,000 lbm/min. (9,070 kg/min.) 2% Pulser dependent 180 75,000 lbs (34.0 T) IVSS TEM • Torsional Efficiency Monitor measurements from the Geo-Pilot system shaft rotation. •Min., Max., and Ave. RPM measurements from the Geo-Pilot system shaft rotation. • Shock and Vibration measurements using a single axis Accelerometer arrangement. The IVSS Sensor is available in the PWD, CTN and ABI tools. Torsional Efficiency Monitor is mounted in all sizes of the Geo-Pilot system. DDS2
Pilot™ Fleet Drilling Systems
Vibration Measurement Sensors
DDSr • Shock and vibrationmeasurements using a Triaxial Accelerometer arrangement. • Min., Max., and Ave. RPM measurements using dual Magnetometers and a MEMS Gyroscope. • Shock and vibration measurements using a Triaxial Accelerometer arrangement. • Min., Max., and Ave. RPM measurements using dual Magnetometers. DDSr sensors available in the DGR, HCIM, IXO, Geo-Pilot, LDN, and GABI tools.
Geo-Pilot® XL Rotary SteerableSystem *
5200 Series Nominal OD Hole Size Range DDS2 Sensor is mounted in the M5 Integrated LWD tool. Max. Housing OD Length Nominal Tool Weight (with flex sub) 5.25 in. (133 mm) 5.875 – 6.75 in. (152 – 171 mm) 5.25 in. (133 mm) 16.2 ft (4.9 m) With flex sub 27.7 ft (8.4 m) 1,250 lbs (570 kg) 3.50 in. IF box Top 10,000 ft-lbf (13.56 kNm) 3.50 in. IF pin Bottom 10,000 ft-lbf (13.56 kNm) MinimumSteering Angle 5° 10°/100 ft (30 m) 7600 Series 6.75 in. (171 mm) 8.375 – 10.625 in. (213 – 270 mm) 20 ft (6.1 m) 29.2 ft (8.9 m) 3,300 lbs (1,500 kg) 4.50 in. IF box 32,000 ft-lbf (43.39 kNm) 4.50 in. IF pin 25,000 ft-lbf (33.90 kNm) 0° 5°/100 ft (30 m) 9600 Series 9.625 in. (244 mm) 12.25 – 26 in. (311 – 660 mm) 22 ft (6.7 m) 31 ft (9.5 m) 4,850 lbs (2,200 kg) 6.625 in. REG box 50,000 ft-lbf (67.79kNm) 6.625 in. REG pin 59,000 ft-lbf (79.99 kNm) 0° 6°/100 ft (30 m)
Geo-Span® Downlink Service
The Geo-Span Downlink Service allows the transmission of commands from surface to the LWD tool string with no interruption in drilling operations. The Geo-Pilot system, the GeoTap formation tester and the PWD Replay® service functionality can be controlled by the Geo-Span service. 10,000 psi / 69...
LWD and Drilling Technology Suite
LWD Technology Suite
Common LWD Specifications
Nominal OD Nominal ID Connections Make-up torque Max. dogleg severity Rotating Sliding Max. mass flow rate Max. sand content Max. LCM * Max. RPM Max. WOB Vibration Power Supply 3.125 in. (79 mm) 0.8 in. (20 mm) 2.75 in. 8 STUB ACME 2,000 ft-lbf (2.7 kNm) 14°/100 ft (30m) 30°/100 ft (30m) 1,800lbm/min. (816 kg/min.) 2% Pulser dependent 60 15,000 lbs (6.8 T) Lithium battery or downhole generator Design Performance (Build/Drop/Turn) Max. Dogleg Severity 8.00 in. *, **, ‡ (203 mm) 9.50 in. ‡ (241 mm) Rotating 14°/100 ft (30 m) Sliding 25°/100 ft (30 m) Max. Shaft Rotary Torque RPM Range 4.5 ft (1.37 m) 4.4 ft (1.34 m) Max. WOB Vibration, Max. Mass Flow Rate, Max. Sand Content, Max. LCMLimit 8,000 ft-lbf (10.8 kNm) 60 – 180 25,000 lbs 10°/100 ft (30 m) 21°/100 ft (30 m) 20,000 ft-lbf (27.1 kNm) 60 – 250 55,000 lbs 8°/100 ft (30 m) 14°/100 ft (30 m) 30,000 ft-lbf (40.7 kNm) 60 – 250 100,000 lbs 4.75 in. (121 mm) 1.25 in. (32 mm) 3.50 in. IF 10,000 ft-lbf (13.6 kNm) 14°/100 ft (30m) 30°/100 ft (30m) 3,750 lbm/min. (1,700 kg/min.) 2% Pulser dependent 180 25,000 lbs (11.3 T) 6.75 in.(171 mm) 1.92 in. (49 mm) 4.50 in. IF 30,000 ft-lbf (40.7 kNm) 10°/100 ft (30m) 21°/100 ft (30m) 10,000 lbm/min. (4,535 kg/min.) 2% Pulser dependent 180 45,000 lbs (20.6 T) 1.92 in. (49 mm) 6.625 in. REG 56,000 ft-lbf (75.9 kNm) 8°/100 ft (30m) 14°/100 ft (30m) 10,000 lbm/min. (4,535 kg/min.) 2% Pulser dependent 180 60,000 lbs (27.0 T) 8.00 in. (203 mm) 2.38 in. (60 mm) 6.625 in. REG 46,000 ft-lbf(62.4 kNm) 8°/100 ft (30m) 14°/100 ft (30m) 20,000 lbm/min. (9,070 kg/min.) 2% Pulser dependent 180 60,000 lbs (27.0 T) 9.50 in. (241 mm) 2.38 in. (60 mm) 7.625 in. REG 88,000 ft-lbf (119.3 kNm) 8°/100 ft (30m) 14°/100 ft (30m) 20,000 lbm/min. (9,070 kg/min.) 2% Pulser dependent 180 75,000 lbs (34.0 T) IVSS TEM • Torsional Efficiency Monitor measurements from the Geo-Pilot system shaft rotation. •Min., Max., and Ave. RPM measurements from the Geo-Pilot system shaft rotation. • Shock and Vibration measurements using a single axis Accelerometer arrangement. The IVSS Sensor is available in the PWD, CTN and ABI tools. Torsional Efficiency Monitor is mounted in all sizes of the Geo-Pilot system. DDS2
Pilot™ Fleet Drilling Systems
Vibration Measurement Sensors
DDSr • Shock and vibrationmeasurements using a Triaxial Accelerometer arrangement. • Min., Max., and Ave. RPM measurements using dual Magnetometers and a MEMS Gyroscope. • Shock and vibration measurements using a Triaxial Accelerometer arrangement. • Min., Max., and Ave. RPM measurements using dual Magnetometers. DDSr sensors available in the DGR, HCIM, IXO, Geo-Pilot, LDN, and GABI tools.
Geo-Pilot® XL Rotary SteerableSystem *
5200 Series Nominal OD Hole Size Range DDS2 Sensor is mounted in the M5 Integrated LWD tool. Max. Housing OD Length Nominal Tool Weight (with flex sub) 5.25 in. (133 mm) 5.875 – 6.75 in. (152 – 171 mm) 5.25 in. (133 mm) 16.2 ft (4.9 m) With flex sub 27.7 ft (8.4 m) 1,250 lbs (570 kg) 3.50 in. IF box Top 10,000 ft-lbf (13.56 kNm) 3.50 in. IF pin Bottom 10,000 ft-lbf (13.56 kNm) MinimumSteering Angle 5° 10°/100 ft (30 m) 7600 Series 6.75 in. (171 mm) 8.375 – 10.625 in. (213 – 270 mm) 20 ft (6.1 m) 29.2 ft (8.9 m) 3,300 lbs (1,500 kg) 4.50 in. IF box 32,000 ft-lbf (43.39 kNm) 4.50 in. IF pin 25,000 ft-lbf (33.90 kNm) 0° 5°/100 ft (30 m) 9600 Series 9.625 in. (244 mm) 12.25 – 26 in. (311 – 660 mm) 22 ft (6.7 m) 31 ft (9.5 m) 4,850 lbs (2,200 kg) 6.625 in. REG box 50,000 ft-lbf (67.79kNm) 6.625 in. REG pin 59,000 ft-lbf (79.99 kNm) 0° 6°/100 ft (30 m)
Geo-Span® Downlink Service
The Geo-Span Downlink Service allows the transmission of commands from surface to the LWD tool string with no interruption in drilling operations. The Geo-Pilot system, the GeoTap formation tester and the PWD Replay® service functionality can be controlled by the Geo-Span service. 10,000 psi / 69...
Leer documento completo
Regístrate para leer el documento completo.