Alpolic panel de aluminio compuesto

Examples of Installation Method

ALPOLIC/fr is widely used for external claddings and some interior surfaces, while ALPOLIC is used mainly for signage. Both materials are also used for civil works and other miscellaneous applications. In order to install Aluminum Composite Materials (ACMs) in these applications, many advanced methods have been proposed and improved on for years. We willintroduce some of the most common methods suitable for ALPOLIC/fr and ALPOLIC below. Examples of installation method: Category Exterior Application External wall cladding (1) External wall cladding (2) External wall cladding (3) External wall cladding (4) Roof covering Spandrel Sunshade or cornice Interior Internal wall cladding Interior column cover Interior partition Ceiling Others Roof panel ParapetSignboard Name of installation method External wall cladding-wet sealant joint External wall cladding-hanging method External wall cladding-dry gasket joint External wall cladding-narrow open joint Roof covering Spandrel back panel of glass curtain wall Sunshade or cornice Internal wall cladding-hanging method Interior column cover with Z-flange system Interior partition panel in factory Ceilingpanel with non-penetrating rivet Roof of pedestrian passage Parapet and soffit for renovation Corporate shop front signboard No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14

URL http://www.alpolic.com
October 2008

1. External wall cladding - wet sealant joint This installation system, with tray type (rout and return) panels and sealing joints, is one of the most common methods and it is availablefor a wide range of new buildings and renovation projects. After fixing ALPOLIC/fr panels on the substructure, we apply a suitable sealing material to the joints in order to ensure water-tightness. Horizontal section

Vertical section

Data embodied herein is intended only for estimate by technically skilled persons, with any use thereof to be at their own discretion and risk. MitsubishiPlastics shall have no responsibility or liability for results from such use or infringement of any patent or other proprietary right.

1

2. External wall cladding - hanging method The hanging system is also one of the most common fixing methods. It simplifies the installation work at the construction site and hence we can shorten the installation period. It is easy to loosen the movement due tothermal expansion/contraction with this method, because panels are not tightly fastened to the sub-frame but are simply suspended. Horizontal section

Vertical section

Data embodied herein is intended only for estimate by technically skilled persons, with any use thereof to be at their own discretion and risk. Mitsubishi Plastics shall have no responsibility or liability for results fromsuch use or infringement of any patent or other proprietary right.

2

3. External wall cladding - dry gasket joint In this method, we use gaskets in the joints instead of sealants. The durability of EPDM gaskets is comparable to that of the sealant, in addition, the gasket joint reduces the amount of dirt or stain on the ALPOLIC/fr surface. Horizontal section

Vertical section

Dataembodied herein is intended only for estimate by technically skilled persons, with any use thereof to be at their own discretion and risk. Mitsubishi Plastics shall have no responsibility or liability for results from such use or infringement of any patent or other proprietary right.

3

4. External wall cladding – narrow open joint Generally, this kind of method is suitable for Stone andTimber-patterned ALPOLIC/fr panels in which narrow joints between the panels are aesthetically effective. According to need, we apply a sealing material or EPDM gasket to the joints. Horizontal section

Vertical section

Data embodied herein is intended only for estimate by technically skilled persons, with any use thereof to be at their own discretion and risk. Mitsubishi Plastics shall have no...