Analizador
Field Measuring Instruments
Get a Complete Diagnosis of UPS Batteries with a Single Device
Auto-hold and Auto-data storage Enhanced resistance against noise Store up to 4800 sets of data PC Interface User-exchangeable probe tip
WIDE 60V RANGE
Ideal for UPS Backup Batteries
The New Standard for Assessing Deterioration of Lead-acid Batteries
Repeated recharging ofa secondary battery can lead to battery deterioration and increase its internal resistance. Problems can intensify when there is a short-circuit in the internal cell leading to voltage drop, overheating and complete battery malfunction. Worst of all, these problems can cause life-threatening fires and other accidents.
2
HANDS FREE Data Capture Allows You to Focus on the Testing
Togglebetween 4 different ways to save data
F ul ly Dat Auto m aC apt atic Automatically save data as ur e AUTO HOLD & AUTO MEMO soon as reading is stabilized
TEST & SAVE
AUTO MEMO
Inst ant aneously s ave measurement data with one touch using the Remote Control Switch 9466 saddled to the test lead
Press the HOLD then MEMO keys whenever you need to save data
Save up to 4800 Sets of BatteryData
Check stabilized measurement value before saving with the Remote Control Switch 9466
AUTO HOLD
Quickly Download Data to a PC via USB Interface - Effortlessly Manage Using Bundled Software
The hassle-free measurement process is extended to data management and processing using the bundled data management software. All 4800 sets of data can be uploaded to the PC quickly and effortlessly viaa USB cable, and displayed neatly in table format. Edit comparator tables and send them back to the 3554.
Store and edit up to 200 sets of comparator settings
Pencil and Paper Not Required
Automatically clear data from the 3554
USB
Edit and Send Comparator Settings
Download:
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Data Memory Number Range Resistance value Resistance limits Voltage value Voltage limitTemperature Judgement Date & time
Download Data to a Spreadsheet
3
Tough Against Noise Plus Wide 60V Range Trying to measure UPS backup batteries while they are still being used naturally brings about noise com- Three-rank rating of battery state: ing from the battery's inverter or rectifying circuit. The enhanced measurement current in the 3554 Pass, Warning or Fail
plus fortified circuitdesign, added with the Averaging Function to handle batteries that have fluctuating measurement values no matter how steady you hold the probe makes the battery tester extra resistant against the adverse effects of noise.
Assessment is based on a 6-way combination of comparisons against upper and lower resistance limits and a voltage threshold. Immediately see the judgement result on the brightLCD and beep on your choice of PASS or WARNING/FAIL.
Resistance VOLTAGE
Low Pass Warning
In Range Warning Warning
High Fail Fail
Second resistance limit
Voltage threshold value
High Low
First resistance limit
✓ Common battery cells: 0 to 12V DC ✓ Fork lifts and electric vehicles: 48V DC
60VDC maximum between terminals
10 Hours of Save time and money Continuous with anOperation uninterrupted workflow
Wide Selection of Tough and Versatile Test Probes
Sta nd
d ar
essory Acc
The standard Pin Type Leads 9465-10 with the single test pin on each lead has been fortified to withstand even the toughest use, while a new dual-axis mechanism incorporated in the new Pin Type Lead 9772 allows the TWO pins in each test lead to move independently. Just in case ofbreakage, the pins on both the 9465-10 and the 9772 can be replaced easily on site.
13.5
φ 2.9
φ 1.27 φ 2.7
1
Strengthened Test Pin
Optional Ac ce
9.15
Maximum jaw diameter: φ 15mm Clip Type Lead with • 1.7m between connector and Temperature Sensor junction 9460 • 25cm between junction and probe tip Large Clip Type Leads 9467 • 85cm between connector and junction • 25cm between...
Regístrate para leer el documento completo.