Aser
DIN EN ISO 4957
NF EN ISO 4957UNI EN ISO 4957 | |
100McCrW4 | An oil hardening ISO 4957 specification which hardens at a relatively low temperature with
minimum distortion. |X155CrVMo12-1 | An ISO 4957 tool steel specification which gives a good hardness with added toughness. This grade
can be vacuum hardened when minimum distortion is required. |
X210Cr12 | ISO4957 tool steel which has a high carbon, high chromium content and attains a high hardness
with good abrasion resistance. |
X210CrW12 | This grade achieves a high hardness with good abrasionresistance. |
X100CrMoV5-1 | An air hardening ISO 4957 tool steel. It characteristics are its high abrasion
resistance with good toughness. |
X40CrMoV5-1 | This is a hot work tool steelspecification. It is air hardening with very little distortion. |
60WCrV7 | A shock resisting ISO 4957 specification tool steel, with good abrasion resistance. When
hardened it offers a goodcutting ability with great toughness |
40CrMnMo7 | This is is a pre-hardened high tensile steel which is readily machineable. 40CrMnMoS86 is a
similar ISO 4957 grade with a higher sulphur content |X45NiCrMo4 | A 4 1/4% nickel steel, which achieves a good through hardness. A ISO 4957 grade capable of
taking a good polish and is commonly used as a plastic mould steel. |
S6-5-2 | A high speed steel, which offers good wear resistance with superior toughness and machineability. |
X42Cr13 | A 13% chromium stainless mould steel which will achieve a good hardness and gives a good...
Regístrate para leer el documento completo.