Asme

LISTA DE NORMAS ASME
ASME A112.1.2: Air Gaps in Plumbing Systems (For Plumbing Fixtures and Water- Connected Receptors)
ASME A112.1.3: Air Gap Fittings for Use with Plumbing Fixtures, Appliances, and Appurtenances
ASME A112.14.1: Backwater Valves
ASME A112.14.3: Grease Interceptors
ASME A112.14.4: Grease Removal Devices
ASME A112.18.1: Plumbing Fixture Fittings
ASME A112.18.2: PlumbingFixture Waste Fittings
ASME A112.18.3: Performance Requirements for Backflow Protection Devices and Systems in Plumbing Fixture Fittings
ASME A112.18.6: Flexible Water Connectors
ASME A112.18.7: Deck Mounted Bath/Shower Transfer Valves with Integral Backflow Protection
ASME A112.19.10: Dual Flush Devices for Water Closets
ASME A112.19.12: Wall Mounted and Pedestal Mounted, Adjustable andPivoting Lavatory and Sink Carrier Systems
ASME A112.19.13: Electrohydraulic Water Closets
ASME A112.19.14: Six-Liter Water Closets Equipped with Dual Flushing Device- Supplement 1: 2003
ASME A112.19.15: Bathtubs/Whirlpool Bathtubs with Pressure Sealed Doors
ASME A112.19.17: Manfactured Safety Vacuum Release Systems (SVRS) for Residential and Commercial Swimming Pool, Spa, Hot Tub, and Wading PoolSuction Systems
ASME A112.19.1M: Enameled Cast Iron Plumbing Fixtures-Errata – November 1996; Supplement 2 – June 2000
ASME A112.19.2M: Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals-Revision and Consolidation of ASME A112.19.2M and ASME A112.19.6
ASME A112.19.3: Stainless Steel Plumbing Fixtures (Designed for Residential Use)- Supplement: September2002
ASME A112.19.4M: Porcelain Enameled Formed Steel Plumbing Fixtures-Errata – November 1996; Supplement 1 – 1998; Supplement 2 – June 2000
ASME A112.19.5: Trim for Water-Closet Bowls, Tanks, and Urinals
ASME A112.19.6: Hydraulic Performance Requirements for Water Closets and Urinals- Included in A112.19.2-2003
ASME A112.19.7M: Whirlpool Bathtub Appliances
ASME A112.19.8M: Suction Fittings forUse in Swimming Pools, Wading Pools, Spas, Hot Tubs, and Whirlpool Bathtub Appliances
ASME A112.19.9M: Non-Vitreous Ceramic Plumbing Fixtures-Supplement 1: 2002
ASME A112.20.1: Qualification of Installers of High Purity Piping Systems
ASME A112.20.2: Qualification of Installers of Firestop Systems and Devices for Piping Systems
ASME A112.21.2M: Roof Drains-Revision of ANSI A112.21.2-1971ASME A112.21.3M: Hydrants for Utility and Maintenance Use-Revision of ANSI 112.21.3-1976
ASME A112.3.1: Performance Standard and Installation Procedures for Stainless Steel Drainage Systems for Sanitary, Storm, and Chemical Applications, Above and Below Ground
ASME A112.3.4: Macerating Toilet Systems and Related Components
ASME A112.36.2M: Cleanouts
ASME A112.4.1: Water Heater Relief Valve DrainTubes
ASME A112.4.14: Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems
ASME A112.4.2: Water Closet Personal Hygiene Devices
ASME A112.4.3: Plastic Fittings for Connecting Water Closets to the Sanitary Drainage System
ASME A112.4.7: Point of Use and Branch Water Submetering Systems
ASME A112.6.1M: Floor-Affixed Supports for Off-the-Floor Plumbing Fixtures for PublicUse
ASME A112.6.2: Framing-Affixed Supports for Off-the-Floor Water Closets with Concealed Tanks
ASME A112.6.3: Floor Drains and Trench Drains
ASME A112.6.4: Roof, Deck, and Balcony Drains
ASME A112.6.7: Enameled and Epoxy Coated Cast Iron and PVC Platic Sanitary Floor Sinks
ASME A112.6.9: Siphonic Roof Drains
ASME A120.1: Safety Requirements for Powered Platforms for Building MaintenanceASME A13.1: Scheme for the Identification of Piping Systems
ASME A17.1: Safety Code for Elevators and Escalators-Addenda A: 2005; Supplement: 08/12/2005
ASME A17.1 HDBK: Safety Code for Elevators and Escalators
ASME A17.1 INTERPRETATIONS
Interpretations to A17.1-2003 Safety Code for Elevators and Escalators-Includes Interpretations No. 25 through 27
ASME A17.2: Guide for Inspection of...