Assd

P4M80-M4

FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed andused in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.

The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves theright to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.

The content of this user’s manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user’smanual. All the
brand and product names are trademarks of their respective companies.

i

Table of Contents
Chapter 1: Introduction .......................................................... 1
1.1

Motherboard Features ..........................................................1

1.2

Package Checklist ................................................................4

1.3

Layoutand Components.......................................................5

Chapter 2: Hardware Installation ........................................... 6
2.1

Installing Central Processing Unit (CPU)..............................6

2.2

FAN Headers ........................................................................7

2.3

Installing SystemMemory.....................................................8

2.4

Connectors and Slots............................................................9

Chapter 3: Headers & Jumpers Setup................................. 12
3.1

How to Setup Jumpers .......................................................12

3.2

Detail Settings.....................................................................12

Chapter 4: UsefulHelp.......................................................... 19
4.1

Award BIOS Beep Code .....................................................19

4.2

Extra Information.................................................................19

4.3

Troubleshooting ..................................................................21

Chapter 5:WarpSpeeder™................................................... 22
5.1

Introduction .........................................................................22

5.2

System Requirement ..........................................................22

5.3

Installation ...........................................................................23

5.4

[WarpSpeeder™] includes 1 tray icon and 5 panels...........24

ii

P4M80-M4

CHAPTER1: INTRODUCTION
1.1

MOTHERBOARD FEATURES

A. Hardware
CPU
Supports Socket 478.
Supports Intel Pentium 4 processor up to 3.4GHz.
Supports Intel Celeron/Celeron D processor.
Supports Intel Pentium 4 Northwood/Prescott CPU.
Do not support Williamate CPU.
Front Side Bus at 400/533/800 MHz.

Chipset
North Bridge: VIA P4M800.
South Bridge: VIA VT8237R.

Dimensions
ATX Form Factor:20.2cm(W) x 24.4cm (L)

Operating System Supporting
Supports Windows 98SE, Windows NT, Windows 2000,
Windows ME, Windows XP, Red-Hat Linux, and UNIX series.

System Memory
Supports up to 2 DDR devices.
Supports 266/333/400MHz DDR devices.
Maximum memory size is up to 2GB. (Following table is only for
reference.)
DIMM Socket
Location
DIMM1
DIMM2

DDR Module

Total Memory
Size...