Av2600

HARMAN KARDON® AVR 2600/AVR 3600/AVR 360/AVR 460 SOFTWARE UPGRADE INSTRUCTIONS
Harman Kardon is pleased to offer this product upgrade, which improves the performance of your AVR and addressessoftware issues. Unlike many consumer products, which are designed with “fixed” memory, the AVR 2600, AVR 3600, AVR 360 and AVR 460 feature flash memory that is upgradable by loading the new software on astandard USB memory stick and docking it in the receiver’s front-panel USB port.

What this Upgrade Addresses
This new software upgrades your receiver’s HDMI to HDMI v. 1.4a with 3D. It also makesother improvements to HDMI performance, and includes all the benefits of the previous software upgrade for these models.

Important Note
This software is specially designed for use with HarmanKardon AVR 2600, AVR 3600, AVR 360 and AVR 460 receivers. Use with any other models or brands may cause damage to the product. DO NOT USE THIS SOFTWARE WITH ANY OTHER PRODUCTS.

How Can I Tell if MyReceiver Needs this Upgrade?
This software upgrade is the following version: V 1.1 AFW v1.6.1.1 USB Version 17-03-2009 02 DSP VERSION 1.1.1 Depending on when your AVR was manufactured, it may havealready had the latest software installed at the factory. To see if its software requires an upgrade, please follow these steps: • With the AVR turned on, press the remote’s Setup button, and then press1-2-3-0-OK on the remote. • If the second line of the receiver’s front-panel display reads AFW v1.6.1.1, your receiver has this latest software version and no further action is needed. • If the display’ssecond line shows any other readout, please proceed with the upgrade.

System Requirements
To install the software upgrade, you will need a USB memory stick with at least 400Mb of availablestorage capacity. We recommend that there be no other files in the main “root” directory the memory device. If the root directory does contain any existing files, we recommend that you either remove them...