Ayuda

File version Date

: 1.0.0.1 : September 23, 2010.

AFT Firmware Upgrade procedure on Windows XP/2003/Vista/2008/7. 1. Exit ALL applications which use Sangoma Cards/API. NOTE: Do not turn offyour computer or terminate the upgrade process while it is running. 2. Open "Device Manager" and select Sangoma card:

2. Open Properties of the Sangoma card and change Driver Mode to "FirmwareUpdate":

Click on "OK". 3. Select the "Sangoma Hardware Abstraction Driver":

4. Open Properties of the "Sangoma Hardware Abstraction Driver":

Browse to the Firmware file you want to use for theupgrade and click on "Start Firmware Update…" button. Please note: card's PCI ID will be changed by firmware update! After the upgrade is complete it is important to Power Down/Up the system (Not aRestart). After system Power Down/Up cycle, Windows PnP system will recognize the card as a "New Device" and will ask for drivers for this "New Device". Cancel the automatic install and perform the driver'Upgrade' procedure, as it described in INSTALL.doc or in INSTALL.pdf.

OPTIONAL: When multiple cards of the same type installed on a system, it is possible to run Command-line Firmware Upgradeusing wanrouter.exe utility (without using Device Manager at all): wanrouter fw_update Update Firmware of all cards of model to the same firmware file . can be: a101, a102, a104, a108, a200, a400,a500, a140, a56, b600, b700 is a full path to firmware file appropriate for the 1. Exit ALL applications which use Sangoma Cards/API. 2. Open Command Window and run wanrouter.exe utility. Examples:To update all A108 cards in the system: wanrouter fw_update a108 "c:\tmp\A108dm_0100_V43.BIN" To update all A200 cards in the system: wanrouter fw_update a200 "c:\tmp\A200_0040_V13.BIN" 3. After theupgrade is complete it is important to Power Down/Up the system (Not a Restart). After system Power Down/Up cycle, Windows PnP system will recognize the card as a "New Device" and will ask for drivers...