Bit Configuracion Pic

Bits de Configuración del PIC16F84A (no incluye oscilador interno)
Oscilador externo 4MHz
CONFIG1: 0x3FF2
--------------------------------------------------------------------------------------
Oscillator: HS
Watchdog Timer: Off
Power Up Timer: On
Code Protect: Off

Bits de Configuración del PIC16F628A
Oscilador interno 4MHz (por defecto)
CONFIG1: 0x2150--------------------------------------------------------------------------------------
Oscillator:    INTOSC: I/O on RA6/OSC2, I/O on RA7/OSC1
Watchdog Timer: Off
Power Up Timer: Enabled
Master Clear Enable: Disabled
Brown Out Detect: Enabled
Low Voltage Program: Disabled
Data EE Read Protect: Disabled
Code Protect: Off

@ DEVICE pic16F876, XT_OSC ' System Clock Options
@ DEVICE pic16F876, WDT_ON ' Watchdog Timer
@ DEVICE pic16F876,PWRT_ON ' Power-On Timer
@ DEVICE pic16F876, BOD_ON ' Brown-Out Detect
@ DEVICE pic16F876, LVP_OFF ' Low-Voltage Programming
@ DEVICE pic16F876, CPD_OFF ' Data Memory Code Protect
@ DEVICE pic16F876, PROTECT_OFF ' Program Code Protection
@ DEVICE pic16F876, WRT_OFF ' Flash Memory Word Enable





Bits de Configuración del PIC16F88
Oscilador interno 4MHz
CONFIG1: 0x3F50
CONFIG2: 0x3FFC--------------------------------------------------------------------------------------
Oscillator: INTRC-OSC2 as RA6
Watchdog Timer: Off
Power Up Timer: Enabled
RA5/MCLR Pin Function Select: RA5
Brown Out Detect: Enabled
Low Voltage Program: Disabled
Data EE Read Protect: Disabled
Flash Program Write: Write Protect Off
Background Debug: Disabled
CCP1 Mux: RB0
Code Protect: Off
Fail-Safe Clock Monitor: DisabledInternal External Switch Over: Disabled



Bits de Configuración del PIC16F877A (no incluye oscilador interno)
Oscilador externo 4MHz
CONFIG1: 0x2F42
--------------------------------------------------------------------------------------
Oscillator: HS
Watchdog Timer: Off
Power Up Timer: On
Brown Out Detect: On
Low Voltage Program: Disabled
Data EE Read Protect: Off
Flash Program Write: Write ProtectOff
Background Debug: Disabled
Code Protect: Off

@ DEVICE pic16F876, XT_OSC ' System Clock Options
@ DEVICE pic16F876, WDT_ON ' Watchdog Timer
@ DEVICE pic16F876, PWRT_ON ' Power-On Timer
@ DEVICE pic16F876, BOD_ON ' Brown-Out Detect
@ DEVICE pic16F876, LVP_OFF ' Low-Voltage Programming
@ DEVICE pic16F876, CPD_OFF ' Data Memory Code Protect
@ DEVICE pic16F876, PROTECT_OFF ' Program CodeProtection
@ DEVICE pic16F876, WRT_OFF ' Flash Memory Word Enable



Bits de Configuración del PIC16F887
Oscilador interno 4MHz (por defecto)
CONFIG1: 0x23C4
CONFIG2: 0x0700
--------------------------------------------------------------------------------------
Oscillator: INTOSCIO: I/O on RA6/OSC2 and RA7/OSC1
Watchdog Timer: Disabled
Power Up Timer: Enabled
Master Clear Enable: RE3/MCLR is digital input,MCLR internally tied to VDD
Code Protect: Off
Data EE Read Protect: Disabled
Brown Out Reset Selection: Bor enabled
Internal External Switch Over: Disabled
Monitor Clock Fail-Safe: Disabled
Low Voltage Program: RB3 is digital I/O, HV on MCLR must be used for programming
Background Debug: In-Circuit Debugger disabled, RB6 and RB7 are general purpose I/O pins.
Brown Out Reset Selection Bit: BrownOut Reset set to 4.0V
Flash Program Self Write: Write Protect Off

Bits de Configuración del PIC18F2550-4550
(incluye oscilador interno, configurado para el oscilador externo)
Oscilador externo 8MHz
CONFIG1L: 0x0000
CONFIG1H: 0x000E
CONFIG2L: 0x001F
CONFIG2H: 0x001E
CONFIG3H: 0x0001
CONFIG4L: 0x0081
CONFIG5L: 0x000F
CONFIG5H: 0x00C0
CONFIG6L: 0x000F
CONFIG6H: 0x00E0
CONFIG7L: 0x000F
CONFIG7H:0x0040
--------------------------------------------------------------------------------------
96MHz PLL Prescaler: Divide by 2 (8MHz input)
CPU System Clock Postscaler:  [OSC1/OSC2 Src:/1][96MHz PLL Src:/2]
Full Speed USB Clock Source Selection: Clock src from 96MHz PLL/2
Oscillator: HS:HS+PLL, USB-HS
Fail-Safe Clock Monitor Enable: Disabled
Internal External Switch Over: Disabled
Power Up Timer:...