Blendec

operations

manual

for the: Titan ABC Smoother and SpaceSaver

BRAWN. BRAINS. BLENDTEC.™

Table Of Contents
Section Page Section 1.....Important Safeguards 1 Section 2.....Component Overview 3 5 Section 3.....Unpacking Section 4.....Installation 6 Section 5.....Operating Instructions 9 Section 6.....Warranty and Service 13 Appendix A.....ABC Operation A-I A-II AppendixB.....Product Diagrams

Page 

SECTION 1 – IMPORTANT SAFEGUARDS READ ALL INSTRUCTIONS CAREFULLY BEFORE USING YOUR BLENDTEC MACHINE. 1.1 SAFETY CERTIFICATION The TITAN, ABC, Smoother, and SpaceSaver blenders and accessories are certified by ETL to UL standard 763, by CSA standard C22.2 No. 195-m1987, and by CE Standards. 1.2 HEALTH CERTIFICATION The TITAN, ABC, Smoother, and SpaceSaver blenders andaccessories are certified by NSF International.

R

1.3 AVOID CONTACT WITH MOVING PARTS ● Keep fingers, hands, hair and clothing away from all moving parts. ● Keep all utensils away from the drive socket and blender blades during operation. Metal utensils will damage blades. ● NEVER put hands into blender jar or add substances by hand when blender is operating. ● NEVER place jar into drivesocket if blender motor is operating. ● Do not rock the blender when it is operating. Keep the blender jar straight up until the operation is complete. ● These precautions will prevent personal injury and/or damage to the blender. 1.4 POWER CORD PRECAUTIONS ● Do not operate with a damaged cord or plug. ● If the supply cord is damaged, it must be replaced by the manufacturer or its service agent inorder to avoid a hazard. ● Do not let the cord hang over the edge of the work surface. ● Never use an extension cord with the unit. ● Unplug the blender motor before removing from sound enclosure, changing blender locations, or cleaning. 1.5 NEVER ATTEMPT TO REPAIR THE POWER UNIT Never remove the blender base cover. The blender base does not contain self-adjustable or serviceable parts. Allservice and adjustments must be made by a qualified service agent. Removing the cover or attempting to service the blender will void the warranty. 1.6 TURN THE UNIT OFF WHEN NOT IN USE

Page 

Page 

1.7 THE 110/120 VOLT RECEPTACLE FOR EACH POWER UNIT MUST

BE PROTECTED BY A SEPARATE 20 AMP CIRCUIT BREAKER OR FUSE. THE 220/240 VOLT RECEPTACLE FOR EACH POWER UNIT MUST BE PROTECTED BY ASEPARATE 13 AMP CIRCUIT BREAKER OR FUSE.

SECTION 2: COMPONENT OVERVIEW 2.1 BLENDER MOTOR The blender motor consists of the blender base shell, touch pad control, Liquid Crystal Display (LCD) information center, and the power unit. (See Figures 1.1 and 1.2) ● Motor housing: Houses the power unit in a surgical stainless steel casing. Never remove the motor cover. Removal of the motor cover willvoid the warranty. ● Touch Pad: Consists of six buttons which contain pre-programmed settings as well as a pulse for selective blender control. ● LCD Information Center: When a cycle is completed, the display increments the cumulative cycle for warranty purposes. It also indicates overload or over-temperature conditions. ● Blender Motor: This unit is located within the motor housing and contains themachinery which runs the blender, including the electric motor, drive train, and computerized control board. 2.2 BLENDER JAR ASSEMBLY The blender jar assembly consists of the blender jar, blade assembly, and lid. The blender jar assembly integrates these components to ensure consistently blended drinks and greater operator safety. ● Jar: Made from polycarbonate to provide maximum performance aswell as clear visibility of blender performance. ● Blade Assembly: Stainless steel, designed to ensure fast, consistent blending. ● Lid: Designed to provide ease of handling and quick removal for high speed operations. 2.3 OPTIONAL SOUND ENCLOSURE The sound enclosure reduces noise created during blender operation. 2.4 OPTIONAL SOUND ENCLOSURE BOTTOM A “top-of-the-counter” version of the...