Bomba Viking
Up to 37 gpm (140 l/min)
D-35 Specialized Designs
Hydra-Cell Slurry Duty pumps are specifically designed for abrasive slurry applications. See page 78 for complete specifications.
The D-35 Hydra-Cell can be equipped with an SAE or ANSI flange pump head for critical performance applications.
72
United States (612) 332-5681 Fax (612) 332-6937
Instant Information:www.hydra-cell.com Document Fax Back System: (510) 745-0440
United Kingdom +44 (0) 1252 781234 Fax +44 (0) 1252 781235
D-35 Series Performance
flow
model max flow gpm l/min max input rpm
0 40.0 200 400
RPM
600 800 1000
1050
1200
1160
D-35-X D-35-E
37 35
140 132
1050 1150
35.0
200 PSI (13.8 bar) 1200 PSI (83 bar)
D-35-X
140
30.0
D-35-E
120
pressureGallons per Minute
25.0
100
Maximum Inlet Pressure: 250 psi (17.3 bar) Pressure Variable To: 1200 psi (83 bar)
80 20.0
15.0
60
10.0
40
5.0
20
0
0
Liters per Minute
United States (612) 332-5681 Fax (612) 332-6937
Instant Information: www.hydra-cell.com Document Fax Back System: (510) 745-0440
United Kingdom +44 (0) 1252 781234 Fax +44 (0) 1252 78123573
D-35 Series Specifications
Maximum Capacity D-35-X D-35-E rpm 1050 1150 gpm 37 35 revs/liter 7.7 8.2
NPSHr (feet of water)
I/min 140 132
Net Positive Suction Head (NPSHr)
1050 1160
26 24
D-35-X
Delivery @ max pressure revs/gal D-35-X 29 D-35-E 31 Max Inlet Pressure Pressure Variable to Max Temperature
7
D-35-E
22 20 18 16 14 4 12 10 8 6 4 2 0 0 100 200 300 400 500 600700 800 900 1000 1100 1200 2 3 5 6
250 psi (17.3 bar) 1200 psi (83 bar) 250°F (121°C) – Consult factory for correct component selection for temperatures above 160°F (71°C) 2-1/2 inch NPT or 3 inch SAE flange 1-1/4 inch NPT or 1-1/4 inch SAE flange 2 inch Bi-directional Tapered roller 5 US quarts (4.7 liters), see page 100 for oil selection and specification. 240 lbs (109 kg)
Inlet PortDischarge Port Shaft Diameter Shaft Rotation Bearings Oil Capacity Weight
1
RPM
Dry Lift
6
D-35-X D-35-E
175 150 125 100
5
Lift (feet of water)
3 75 2 50
Calculating Required Horsepower
100 x rpm 63,000 + gpm x psi 1,460 = electric motor HP
1 25 0
0
200
400
600
800
1000 1200
RPM
For installation guidelines and other pump selection designconsiderations, refer to pages 107-111.
74
United States (612) 332-5681 Fax (612) 332-6937
Instant Information: www.hydra-cell.com Document Fax Back System: (510) 745-0440
United Kingdom +44 (0) 1252 781234 Fax +44 (0) 1252 781235
Lift (cm of water)
4
NPSHr (meters of water)
D-35 Series Dimensions
D-35 Models with NPT Inlet/Outlet Ports
6.0 (152)
1.2 (30.1)
Ø1.25 NPT outlet2.5 NPT inlet 11.83 (300) dia.
0.50 (12.7) Sq. Key
4.1 (104) 2.00 (50.8) 4.1 (104) 0.9 (22.9) 0.3 (7.6) 0.66 Slot Width (16.8) 6.5 (165) 20.7 (526)
15.2 (386) 7.0 (178)
7.5 (191)
6.5 (165)
0.2 (5.1)
1.15 (29.2) Slot Width 11.5 (292)
9.9 (251)
D-35 Models with SAE Flange Inlet/Outlet Ports
6.0 (152) 1.2 (30.1) 3.0 (76.2) inlet 0.50 (12.7) Sq. Key 2.31 (58.7) Ø1.25(31.8) outlet 1.19 (30.2) 7/16-14 UNC-2B thd.
11.83 (300) dia.
4.1 (104) 2.00 (50.8) 4.1 (104) 0.9 (22.9) 0.3 (7.6) 0.66 Slot Width (16.8) 6.5 (165) 20.7 (526) 2.44 (62)
15.2 (386) 7.0 (178)
5/8-11UNC-2B THD.
7.5 (191)
6.5 (165)
0.2 (5.1)
1.15 (29.2) Slot Width
4.19 (106) 11.5 (292) 9.9 (251)
United States (612) 332-5681 Fax (612) 332-6937
Instant Information:www.hydra-cell.com Document Fax Back System: (510) 745-0440
United Kingdom +44 (0) 1252 781234 Fax +44 (0) 1252 781235
75
D-35 Series Options
Materials of Construction
D-35 Hydra-Cell pumps are manufactured in a variety of heavy-duty materials to meet specific pumping needs. Refer to the design section for more information on appropriate material selection and chemical compatibility. Other...
Regístrate para leer el documento completo.