Bombas
Reparaturanleitung - A10VO 45 DFLR Baureihe 31
SO 850 - Ecomat
Repair instructions - A10VO 45 DFLR
SO 850 - Ecomat
Series 31
Zurück zum Verzeichnis / Return to the index
RDE 92701-01-R/08.99
Hinweis / Inhalt Notice / Contents
Reparaturanleitung A10VO Repair Instructions A10VO
HINWEIS Bezeichnungen, Beschreibungen und Darstellungen entsprechen demInformationsstand zum Zeitpunkt der Drucklegung dieser Unterlage. Änderungen können den Service am Produkt beeinflussen, Verpflichtungen entstehen uns daraus nicht. Methoden und Vorrichtungen sind Empfehlungen, für deren Resultat wir keine Haftung übernehmen können. BRUENINGHAUS HYDROMATIK- Baugruppen, mit Angabe der Fabrik-Nr. bestellt, sind die Basis guter Reparaturen. Einstell- und Prüfarbeitensind bei Betriebstemperatur auf dem Teststand vorzunehmen. Schutz von Personen und Eigentum ist durch Vorkehrungen sicherzustellen. Sachkenntnis, die Voraussetzung für jede Service-arbeit, vermitteln wir in unseren Schulungskursen.
NOTICE Specifications, descriptions and illustrative material shown herein were as accurate as known at the time this publication was approved for printing.BRUENINGHAUS HYDROMATIK reserves the right to discontinue models or options at any time or to change specifications, materials, or design without notice and without incurring obligation. Optional equipment and accessories may add cost to the basic unit, and some options are available only in combination with certain models or other options. For the available combinations refer to the relevant data sheetfor the basic unit and the desired option. Adjustment and tests have to be carried out on the test bench under operating temperatures. Protection of personnel and property has to be guaranteed by appropriate measures. Expert knowledge, the precondition of any service work, can be obtained in our training courses.
INHALT
Seite/ Page
CONTENTS
A10VSO Schnittbild Allgemeine ReparaturhinweiseA10 Ersatzteil - Kits Dichtsätze und Baugruppen Triebwelle abdichten Steuerventil abdichten / reinigen Pumpe demontieren Überprüfungshinweise Montage Abstimmung Pumpe montieren Werkzeuge / Hilfswerkzeuge 3 4 5-6 7-8 9-11 12 13-18 19-21 22 23-26 27
A10VSO Sectional view General repair guidelines A10 spare parts - kits Seal kits and sub-assemblies Sealing the drive shaft Sealing / cleaning thecontrol valve Pump disassembly Inspection hints Adjustment of taper roller bearing Pump assembly Tools, auxiliary tools
2
Brueninghaus Hydromatik
RDE 92701-01-R/08.99
Schnittbild Sectional view
Reparaturanleitung A10VO Repair Instructions A10VO
Brueninghaus Hydromatik
3
RDE 92701-01-R/08.99
Allgemeine Reparaturhinweise General repair guidelines
ReparaturanleitungA10VO Repair Instructions A10VO
Achtung! Nachfolgend Hinweise bei allen Reparaturarbeiten an Hydraulikaggregaten beachten! Attention! Observe the following guidelines when carrying out repairs on hydraulic units!
Alle Öffnungen der Hydraulikaggregate verschließen. Close off all openings of the hydraulic unit.
Alle Dichtungen erneuern. Nur original BRUENINGHAUS HYDROMATIK Ersatzteileverwenden. Replace all of the seals. Use only original BRUENINGHAUS HYDROMATIK spare parts.
Alle Dicht- und Gleitflächen auf Verschleiß prüfen. Achtung: Nacharbeiten an Dichtflächen z.B. durch Schleifpapier kann die Oberfläche beschädigen. Check all sealing and sliding surfaces for wear. Attention: Re-work of the sliding surfaces by using, for example abrasive paper, can damage the surface.Hydraulikaggregate vor Inbetriebnahme mit Hydrauliköl befüllen. Fill the hydraulic unit with hydraulic oil before commissioning.
4
Brueninghaus Hydromatik
RDE 92701-01-R/08.99
A10 Ersatzteil - Kits A10 spare parts - kits
Reparaturanleitung A10VO Repair Instructions A10VO
Gliederung der Ersatzteilgruppen (Gruppen-Inhalte) und Hinweise zur Anwendung
Position Bezeichnung BHY-Horb...
Regístrate para leer el documento completo.