Calculo Estanques A Presion

ASME Code Vessels
10 To 3,000 Gallon Capacity
Vessel Design Criteria
1) Specify if Heating or, Cooling Jacket and medium used.
2) Verify if ASME code stamp and registration with National Board is
required in your area.
3) Optional bottom head Jacket design is available.
4) Insulation of Jacket is available.
5) Specify Top head or cover type if required.
6) Verify plant working pressureand temperature required for operating your Jacket.
7) Internal pressure or vacuum service is available on any WATCO
Vessel, please consult with us.
8) Specify all fittings, flanges, manway, etc.
Standard Specs
1) T-304 or T316 Stainless Steel, wetted parts.
2) Open top: Tank rim is reinforced with flange.
3) Cone, Dished or Sloped bottom (45O to 60O cones available).
4) Aluminized carbonsteel pipe legs with adjustable bullet feet for
leveling-15" drain clearance.
5) Jacket design pressure is rated to up to 150 PSI @ 300O F. (Test
Pressure = 225 PSI).
6) Standard Jacket connections are NPT half couplings.
7) 2 B Mill finish with inside welds ground smooth and flush. Outside
welds wire brushed.
8) Select the jacket most suitable for your application.
See diagram for Jacketillustration.
q - Integral Wall, q - Dimpled Wall, q - Conventional Double Wall.
9) Other specs, material, gauges and finishes are available for your
information by calling our factory.
Note: #4 150 grit polished finish is also available. Vessels can also
be electropolished for pharmaceutical applications.
Options: A wide range of special nozzles, manways, materials,
finishes and sizes areavailable.

CAPACITY CAPACITY
STR.
MODEL U.S. GAL. LITERS DIAMETER SHELL
JKT- 10
10
38
13"
18"
JKT- 18
18
68
18"
18"
JKT- 30
30
114
18"
30"
JKT- 50
50
189
223/4"
30"
JKT- 60
60
227
223/4"
36"
JKT- 80
80
303
30"
30"
JKT-100
100
378
30"
36"
JKT-125
125
473
30"
42"
JKT-150
150
568
36"
36"
JKT-200
200
757
38"
48"
JKT-260
260
984
45"
42"JKT-300
300
1135
45"
48"
JKT-400
400
1514
52"
48"
JKT-500
500
1893
52"
60"

OA
HT.
33"
33"
45"
52"
52"
47"
53"
59"
54"
66"
61"
67"
68"
79"

SQ. FT. SIZE & WIDTH
SHELL NO. OF TOP
JKT.
LEGS
FL.
3.2
2"-3
1"
4.49
2"-3
1"
9.67
2"-3
1"
12.32
2"-3
1"
17.29
2"-3
1"
18.56
2"-3
1"
23.46
2"-3
11/2"
28.04
2"-3
11/2"
27.66
2"-3
11/2"
37.57
2"-311/2"
41.47
2"-3
21/2"
44.61
2"-4
2"
51.66
2"-4
2"
62.2
2"-4
2"

Jacketed Tanks
Sanitary Stainless Steel
10 To 3,000 Gallon Capacity
Specifications & Features
WATCO currently is offering three types of tank jackets; dimple jackets, conventional
double wall jackets and plate coil for many different process applications where heating,
cooling, mixing and storage are required. A widerange of jacket design pressures and
jacket design temperatures are available.
Our jackets are constructed to the latest A.S.M.E. code standards, and where required, are
stamped and registered with the National Board. All jacketed tanks are completely tested
and examined by a qualified inspector.
Where required, all jackets can be insulated and covered with a stainless steel sheathingjacket. Many options are available to meet your process requirements, open top tanks with
covers, closed dished heads with internal pressure or vacuum service.
Our many years of experience in fabricating jacketed tanks become quite apparent upon
inspection of the finished product. Engineering and sales personnel are available to discuss
your specifications or to review your blue prints.
Severalheat transfer mediums can be used economically and efficiently with our dimple
and conventional jackets, such as steam, water and glycol. Stainless steel and carbon steel
jackets are available; consult factory.

CONVENTIONAL

SINGLE WALL

JACKETED TANK

JACKET

Our products “Can be built in accordance with requirements of the ASME Boiler and
Pressure Vessel Code” stamped and...