Calculo Multivariable

Digi One SP Digi One IA Configuration and Administration Guide

92000326_A

 Digi International Inc. 2002. All Rights Reserved

The Digi logo is a trademark of Digi International Inc. All other brand and product names are the trademarks of their respective holders. Information in this document is subject to change without notice and does not represent a commitment on the part of DigiInternational. Digi provides this document “as is,” without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in this manual at any time. This product could include technicalinaccuracies or typographical errors. Changes are periodically made to the information herein; these changes may be incorporated in new editions of the publication.

2

92000326_A

Contents

Chapter 1 Introduction Overview................................................................................................................. 4 Set Up the Hardware............................................................................................... 4 Install Application from CD-ROM ......................................................................... 4 Assign an Initial IP Address.................................................................................... 5 Configure the Digi One SP/IA Device Server ........................................................ 5 Chapter 2Configuring the IP Address Locate Devices on the Network and Assign an Initial IP Address ......................... 6 Configure the IP Address Using ARP-Ping............................................................ 7 Change the IP Address ............................................................................................ 7 Chapter 3 Configuring Port for Socket Services Use Your Browser toConfigure the Device Server................................................ 8 Configure Port Parameters ...................................................................................... 8 Configure a Port for AutoConnect .......................................................................... 9 Configure TCP/UDP Socket Port........................................................................... 9 Configure the Port for UDP Multi-cast................................................................... 9 Create a Serial Tunnel Between Digi Devices...................................................... 10 Chapter 4 Configuring Ports for Printers Configure Ports for Printers .................................................................................. 12 Configure LPD/LPR Printers inWindows 2000 for the PortServer II ................. 12 Chapter 5 Upgrading and Troubleshooting Upgrading the OS (Firmware) .............................................................................. 14 Troubleshooting .................................................................................................... 15 Running Digi One SP/IA HardwareDiagnostics.................................................. 17 Hardware Reset Button ......................................................................................... 17 Configuration Considerations for Printers ............................................................ 17 Information Tables ................................................................................................ 18 FCC Class AStatement........................................................................................ 20 Digi Contact Information ...................................................................................... 20

3

Chapter 1

Introduction

In This Chapter

This chapter provides an overview of the tasks required to configure the Digi One SP or the Digi One IA. Detailed information regarding advanced...