Calibración De Lente Xbox 360

(This tutorial is made by Moda from xbox-scene, this tutorial is free to distribute providing you keep it in original form, if you wish to modify if atleast let me know what for etc… I take noresponsibility for any damage caused to any of your consoles through the use of this tut, basically I aint takin no shit from no one, if you’re a retard then don’t bother doing this mod,.. anyway good luck!)

XBOX 360 DVD POT CALIBRATION V1.0
(For Samsung drives – technique is the same for other drives)
(I have rushed to make this tut, I will release a better one in a couple of days time)

Thistutorial is for those of you which have dirty disc errors, discs sometimes working and sometimes not. Etc .. I hope you get the point. Remember to test your disc on another modded box before yourecalibrate the pot to make sure your disc is a good working copy in the first place. I can recommend using only high quality branded media, Verbatim DVD+R DL seems to be the best so far, after that I wouldrecommend something with Ritek dye. Ive had lots of problems with MCC dye so I wouldn’t recommend that for now, but that’s me and everyone may have mixed results.

Ok lets start. Get your Xbox 360opened up (I’m assuming you know how to do this considering you want to adjust the pot.) Take the metal casing off the dvd drive by removing the 4 screws holding it in place. Now turn it over and youshould see the following…

You need to push the black tab on the bottom right to one side, this lets you lift up the pcb. Do this VERY slowly as it will only lift up a little. One you have lifted ita tiny bit you can remove the cable which is holding the pcb In place, one you have removed this

you should lift the pcb over and left it there. (remember to be gentle at all times, this cablesare hard to come by if you damage them)

Now you should see the picture above. Remove the cable connecting the pcb to the lens so you have more room to calibrate the pot. Now look at the pic below....