Cargo

4, S creen Descriptions
4-1. Settings Screen for Binding
After you turn the power on, the main menu screen appears on the panel. You can set the details of the binding process on
this menu.
pressother tabs on the screen to switch to other menus. Press the setting button to set up a binding
Refer to Chapter 2 "Preparing for Operation" "4.Entering Job Information" ( or p.2-12) for de

nrnrPcs

process, tails.

Main Menu Tab
Pressing this tab opens the main
menu screen.

Fine-adjustment Tab
Pressing this tab opens the fine-adjustment screen.
Motion Check Tab
Pressing thistab opens the motion check screen.

Date and Time Setting Button
The current date and time are
displayed. When pressed, the date
and time setting screen appears.
Setting Value Data
The jobinformation of the memory
currently selected is displayed.
Counter
Displays the number of sets that
was already bound. ____________
Clear Button
Keep pressing this button returns
the counter tozero.______________

Option Tab Pressing this tab opens the option
tab screen.
The current glue tank temperature is
displayed. When pressed, the H|
temperature setting screen appears.
Size ChangeButton
Memory No.
You can save up to 20 job information.
Memory No. Switching Button

Z ZJ J Use this button to select a desired memory No.
Setting Button
Pressing this button opens a •
screento enter job information.

Pressing this button executes a
size change. _____________________

Glue Tank Temperature Button

Test Feed Button
Pressing this button starts test feeding.

4-2.Fine-adjustment Screen
Press the fine adjustment tab to switch to the fine-adjustment screen. Select a
section you want to fine adjust. Refer to Chapter 4 "Fine-adjustment and Option
Setting" "1.Fine adjusting Each Part" (DP p.4-2) for details.

Scoring Width
Select Button
Feed Guide
Select Button

Nipping Guide
Select Button

Nipper Select
Button

Side Glue Width
Select...